cutting machine
CUT-60
Product Features:
1. Can cut metal plates in any customised routes.
2. Plasma cutting. Excellent for cutting carbon steel, stainless steel, aluminium and copper.
3. Widely used in steel structures, manufacturing industries and automobile maintenance.
4. Optimized cutting torch cooling mechanism, greatly lengthens the working life of the components.
5. Air pressure regulator allows operations under high gas pressure conditions.
6. Step-less adjustment for cutting current.
7. Contains electric circuit to protect against over-current, over-heat, over-voltage and short-voltage, safe to operate.
Main Parameters Table:
Input voltage (V)
380
Power factor
0.93
Rated input current (A)
12
No-load loss (W)
60
Output current (A)
20-60
Housing Protection grade
IP21
Rated output volt. (V)
104
Rated output current (A)
60
Insulation grade
F
Max cutting thickness (mm)
18
Duty cycle(%)
60
Efficiency(%)
85
Weight (kg)
19
Dimensions (mm)
505×203x375
Remarks
Input voltage Frequency should be 50/60Hz
Saturday, September 10, 2011
plastic bonding machine
plastic bonding machine
Frequency: 15KHz Power : 1200-2200W
Voltage: 220v Size: 500*600*900mm
welding : 130-240mm
plastic bonding machine
NK-DBS1520
Frequency: 15KHZPower : 1200-2200WVoltage: 220vSize: 500*600*900mmwelding : 130-240mmweight : 95KW
Features
1.Original imported piezoelectric ceramic transducer with strong,stable output;
2.3-bit digital DIP switch, precise time control within 0.01-9.99s;
3.Simple and quick horizontal adjustment of upper/lower molds.
Frequency: 15KHz Power : 1200-2200W
Voltage: 220v Size: 500*600*900mm
welding : 130-240mm
plastic bonding machine
NK-DBS1520
Frequency: 15KHZPower : 1200-2200WVoltage: 220vSize: 500*600*900mmwelding : 130-240mmweight : 95KW
Features
1.Original imported piezoelectric ceramic transducer with strong,stable output;
2.3-bit digital DIP switch, precise time control within 0.01-9.99s;
3.Simple and quick horizontal adjustment of upper/lower molds.
plastic pipe butt fusion machine BDH450
plastic pipe butt fusion machine BDH450
pipe and fitting welder
12 months warranty
stock available
hydraulic welder
plastic pipe butt fusion machine BDH450
Jiangyin Kangchen International Trading Company is specialized in exporting the HDPE pipe fittings for water and gas supply system. We have established stable cooperative business relationship with many pipe fitting factories and clients from Europe, America, Southeast Asia, Middle East and Africa. In most of our cooperative factories, there are more than 20 sets computer auto-controlled injection machines, which dosage of the largest injection machine can be up to 150,000 grams. There are 600 sets moulds for HDPE fitting which can produce as many as 600 kinds of hot melting socket and butt welding fitting.
butt fusion machine:
BDH160: 63, 75, 90, 110, 125, 140, 160MM
BDH250: 90, 110, 125, 140, 160, 180, 200, 225, 250MM
BDH315: 90, 110, 125, 140, 160, 180, 200, 225, 250, 280, 315MM
BDH450: 200, 225, 250, 280, 315, 355, 400, 450MM
BDH630: 315, 355, 400, 450, 500, 560, 630MM
BDH800: 500, 630, 710, 800MM
BDH1200: 630, 710, 800, 900, 1000, 1200MM
fitting fusion machine(fabrication of fittings)
BDHG315: 90, 110, 125, 140, 160, 180, 200, 225, 250, 280, 315MM
BDHG450: 250, 280, 315, 355, 400, 450MM
BDHG630: 315, 355, 400, 450, 500, 560, 630MM
BDHG800: 500, 630, 710, 800MM
BDHG1200: 630, 710, 800, 900, 1000, 1200MM
pipe and fitting welder
12 months warranty
stock available
hydraulic welder
plastic pipe butt fusion machine BDH450
Jiangyin Kangchen International Trading Company is specialized in exporting the HDPE pipe fittings for water and gas supply system. We have established stable cooperative business relationship with many pipe fitting factories and clients from Europe, America, Southeast Asia, Middle East and Africa. In most of our cooperative factories, there are more than 20 sets computer auto-controlled injection machines, which dosage of the largest injection machine can be up to 150,000 grams. There are 600 sets moulds for HDPE fitting which can produce as many as 600 kinds of hot melting socket and butt welding fitting.
butt fusion machine:
BDH160: 63, 75, 90, 110, 125, 140, 160MM
BDH250: 90, 110, 125, 140, 160, 180, 200, 225, 250MM
BDH315: 90, 110, 125, 140, 160, 180, 200, 225, 250, 280, 315MM
BDH450: 200, 225, 250, 280, 315, 355, 400, 450MM
BDH630: 315, 355, 400, 450, 500, 560, 630MM
BDH800: 500, 630, 710, 800MM
BDH1200: 630, 710, 800, 900, 1000, 1200MM
fitting fusion machine(fabrication of fittings)
BDHG315: 90, 110, 125, 140, 160, 180, 200, 225, 250, 280, 315MM
BDHG450: 250, 280, 315, 355, 400, 450MM
BDHG630: 315, 355, 400, 450, 500, 560, 630MM
BDHG800: 500, 630, 710, 800MM
BDHG1200: 630, 710, 800, 900, 1000, 1200MM
Best machine KHBL8-80 Automatic orbit Argon arc tig welders dc machine
tig welders dc
-Stable IGBT TIG performance
-Stable performance
-tube plate DC welders
-Automatic Argon Arc TIG dc welders
Best machine KHBL8-80A Automatic orbit Argon
arc tig welders dc
machine
1.Product Information
Technical parameters
Mains Voltage(3-Phases 50/60Hz)
380V
Rated power input
9KW
Rated input capacity
11.5KVA
Suitable Dia.
8-80mm
Filler Wire Speed
0~1500mm/min
Welding Speed
0.5~5rpm
Frequency
50-60HZ
Rated load sustained rate
60%
Weldable wall thickness
0.5—6.5mm
Tube biggest stretch out length
10mm
Tube biggest indented length
2mm
Welding current adjusting range
4—400A
Pulse frequency
0.5—500HZ
Wire adjustable Angle
<45°
Welding speed
0.1—1.5m/min
Cooling water pressure
1.2kg.f/mm²
Tungsten pole adjustable Angle
<45°
Lateral movement trip
1500mm
Vertical motion stroke
1200mm
Axial movement trip
300mm
Transverse fine-tuning
40mm
Vertical fine-tuning
60mm
Axial fine-tuning
100mm
Note:
1. The above data is only for the customer’s reference.
2. The technical parameters can be customized according to the customer's requirement.
3. We reserve the rights to amend the technical specification here without prior notice.
2.
Details Pics
Machine Picture
Welding head
PLC touch screen
Welding effect
Application
3.Introduction
Function & characteristics
1,Suitable for various kinds of tube-tube plate assembly method;
2,The welding head can on the surface doing a 180 degree rotated, convenient to replace tungsten pole and wire fine-tuning operation; etc.
3,Head of water, electricity, USES the winding way, welding can continuous rotary, cooperate the arc length adjustment, which can realize multilayer welding,
4,By Panasonic IGBT inverter control dc pulse power, high efficiency, arc welding strong stability, weld bead molding beauty,
Operate
All welding parameters fully programmable.
Up to 100 program storage.
4.Certificate
Contact Us:
We are sure we have an exciting cooperation, and reach a win-win stage!
-Stable IGBT TIG performance
-Stable performance
-tube plate DC welders
-Automatic Argon Arc TIG dc welders
Best machine KHBL8-80A Automatic orbit Argon
arc tig welders dc
machine
1.Product Information
Technical parameters
Mains Voltage(3-Phases 50/60Hz)
380V
Rated power input
9KW
Rated input capacity
11.5KVA
Suitable Dia.
8-80mm
Filler Wire Speed
0~1500mm/min
Welding Speed
0.5~5rpm
Frequency
50-60HZ
Rated load sustained rate
60%
Weldable wall thickness
0.5—6.5mm
Tube biggest stretch out length
10mm
Tube biggest indented length
2mm
Welding current adjusting range
4—400A
Pulse frequency
0.5—500HZ
Wire adjustable Angle
<45°
Welding speed
0.1—1.5m/min
Cooling water pressure
1.2kg.f/mm²
Tungsten pole adjustable Angle
<45°
Lateral movement trip
1500mm
Vertical motion stroke
1200mm
Axial movement trip
300mm
Transverse fine-tuning
40mm
Vertical fine-tuning
60mm
Axial fine-tuning
100mm
Note:
1. The above data is only for the customer’s reference.
2. The technical parameters can be customized according to the customer's requirement.
3. We reserve the rights to amend the technical specification here without prior notice.
2.
Details Pics
Machine Picture
Welding head
PLC touch screen
Welding effect
Application
3.Introduction
Function & characteristics
1,Suitable for various kinds of tube-tube plate assembly method;
2,The welding head can on the surface doing a 180 degree rotated, convenient to replace tungsten pole and wire fine-tuning operation; etc.
3,Head of water, electricity, USES the winding way, welding can continuous rotary, cooperate the arc length adjustment, which can realize multilayer welding,
4,By Panasonic IGBT inverter control dc pulse power, high efficiency, arc welding strong stability, weld bead molding beauty,
Operate
All welding parameters fully programmable.
Up to 100 program storage.
4.Certificate
Contact Us:
We are sure we have an exciting cooperation, and reach a win-win stage!
plastic pipe butt welding machine BDH450
plastic pipe butt welding machine BDH450
welding range:200-450mm
pipe welder
hydraulic butt fusion machine
stock available
plastic pipe butt welding machine BDH450
Jiangyin Kangle Plastic Co., Ltd. is a professional enterprise, specialize in all kinds of water supplying pipe and pipe fitting. Each product is produced by the latest facilities in the world. Our major products include large diameter HDPE, PVC-U and PP-R pipes (20mm-1000mm) and all kinds of pipe fittings. They are so superb that our annual output has been 12,000 tons
For years, we have been well-known for fine quality. As a committee member of national pipe products, we are believed by clients. Evidently we are approved by CEOE of Building Material. We acquire ISO9001:2000 international quality system certification and the permit certificate from Shanghai, Anhui and Qingdao governments. We are based on stable quality and a reliable reputation. Our goods are well selling all over the country and abroad.
butt fusion machine:
BDH160: 63, 75, 90, 110, 125, 140, 160MM
BDH250: 90, 110, 125, 140, 160, 180, 200, 225, 250MM
BDH315: 90, 110, 125, 140, 160, 180, 200, 225, 250, 280, 315MM
BDH450: 200, 225, 250, 280, 315, 355, 400, 450MM
BDH630: 315, 355, 400, 450, 500, 560, 630MM
BDH800: 500, 630, 710, 800MM
BDH1200: 630, 710, 800, 900, 1000, 1200MM
fitting fusion machine(fabrication of fittings)
BDHG315: 90, 110, 125, 140, 160, 180, 200, 225, 250, 280, 315MM
BDHG450: 250, 280, 315, 355, 400, 450MM
BDHG630: 315, 355, 400, 450, 500, 560, 630MM
BDHG800: 500, 630, 710, 800MM
BDHG1200: 630, 710, 800, 900, 1000, 1200MM
Welding pipe diameter range:
200-450mm
Warranty: 12months
SPECIFICATIONS
MODEL
BDH450
WELDING RANGE
200-225MM
SDR11-41
250-450MM
SDR9-41
POWER SUPPLY
380V+/-10% 50HZ
OVERALL CYLINDER SECTION
22.36CM2
MAX PRESSURE
6MPa
TOTAL POWER
8.2KW
HEATING PLATE POWER
5.2KW
TRIMMER MOTOR POWER
1.5KW
HYDRAULIC UNIT MOTOR
1.5KW
HEATING PLATE MAX TEMP
270 DEGREE
TEMP. VARIABLE
+/-7DEGREE
MANUFACTURER STANDARD
ISO12176-1
OVERALL WEIGHT
550KGS
welding range:200-450mm
pipe welder
hydraulic butt fusion machine
stock available
plastic pipe butt welding machine BDH450
Jiangyin Kangle Plastic Co., Ltd. is a professional enterprise, specialize in all kinds of water supplying pipe and pipe fitting. Each product is produced by the latest facilities in the world. Our major products include large diameter HDPE, PVC-U and PP-R pipes (20mm-1000mm) and all kinds of pipe fittings. They are so superb that our annual output has been 12,000 tons
For years, we have been well-known for fine quality. As a committee member of national pipe products, we are believed by clients. Evidently we are approved by CEOE of Building Material. We acquire ISO9001:2000 international quality system certification and the permit certificate from Shanghai, Anhui and Qingdao governments. We are based on stable quality and a reliable reputation. Our goods are well selling all over the country and abroad.
butt fusion machine:
BDH160: 63, 75, 90, 110, 125, 140, 160MM
BDH250: 90, 110, 125, 140, 160, 180, 200, 225, 250MM
BDH315: 90, 110, 125, 140, 160, 180, 200, 225, 250, 280, 315MM
BDH450: 200, 225, 250, 280, 315, 355, 400, 450MM
BDH630: 315, 355, 400, 450, 500, 560, 630MM
BDH800: 500, 630, 710, 800MM
BDH1200: 630, 710, 800, 900, 1000, 1200MM
fitting fusion machine(fabrication of fittings)
BDHG315: 90, 110, 125, 140, 160, 180, 200, 225, 250, 280, 315MM
BDHG450: 250, 280, 315, 355, 400, 450MM
BDHG630: 315, 355, 400, 450, 500, 560, 630MM
BDHG800: 500, 630, 710, 800MM
BDHG1200: 630, 710, 800, 900, 1000, 1200MM
Welding pipe diameter range:
200-450mm
Warranty: 12months
SPECIFICATIONS
MODEL
BDH450
WELDING RANGE
200-225MM
SDR11-41
250-450MM
SDR9-41
POWER SUPPLY
380V+/-10% 50HZ
OVERALL CYLINDER SECTION
22.36CM2
MAX PRESSURE
6MPa
TOTAL POWER
8.2KW
HEATING PLATE POWER
5.2KW
TRIMMER MOTOR POWER
1.5KW
HYDRAULIC UNIT MOTOR
1.5KW
HEATING PLATE MAX TEMP
270 DEGREE
TEMP. VARIABLE
+/-7DEGREE
MANUFACTURER STANDARD
ISO12176-1
OVERALL WEIGHT
550KGS
plastic pipe butt welding machine BDH450
plastic pipe butt welding machine BDH450
pipe and fitting welder
12 months warranty
stock available
hydraulic welder
plastic pipe butt welding machine BDH450
Jiangyin Kangchen International Trading Company is specialized in exporting the HDPE pipe fittings for water and gas supply system. We have established stable cooperative business relationship with many pipe fitting factories and clients from Europe, America, Southeast Asia, Middle East and Africa. In most of our cooperative factories, there are more than 20 sets computer auto-controlled injection machines, which dosage of the largest injection machine can be up to 150,000 grams. There are 600 sets moulds for HDPE fitting which can produce as many as 600 kinds of hot melting socket and butt welding fitting.
butt fusion machine:
BDH160: 63, 75, 90, 110, 125, 140, 160MM
BDH250: 90, 110, 125, 140, 160, 180, 200, 225, 250MM
BDH315: 90, 110, 125, 140, 160, 180, 200, 225, 250, 280, 315MM
BDH450: 200, 225, 250, 280, 315, 355, 400, 450MM
BDH630: 315, 355, 400, 450, 500, 560, 630MM
BDH800: 500, 630, 710, 800MM
BDH1200: 630, 710, 800, 900, 1000, 1200MM
fitting fusion machine(fabrication of fittings)
BDHG315: 90, 110, 125, 140, 160, 180, 200, 225, 250, 280, 315MM
BDHG450: 250, 280, 315, 355, 400, 450MM
BDHG630: 315, 355, 400, 450, 500, 560, 630MM
BDHG800: 500, 630, 710, 800MM
BDHG1200: 630, 710, 800, 900, 1000, 1200MM
pipe and fitting welder
12 months warranty
stock available
hydraulic welder
plastic pipe butt welding machine BDH450
Jiangyin Kangchen International Trading Company is specialized in exporting the HDPE pipe fittings for water and gas supply system. We have established stable cooperative business relationship with many pipe fitting factories and clients from Europe, America, Southeast Asia, Middle East and Africa. In most of our cooperative factories, there are more than 20 sets computer auto-controlled injection machines, which dosage of the largest injection machine can be up to 150,000 grams. There are 600 sets moulds for HDPE fitting which can produce as many as 600 kinds of hot melting socket and butt welding fitting.
butt fusion machine:
BDH160: 63, 75, 90, 110, 125, 140, 160MM
BDH250: 90, 110, 125, 140, 160, 180, 200, 225, 250MM
BDH315: 90, 110, 125, 140, 160, 180, 200, 225, 250, 280, 315MM
BDH450: 200, 225, 250, 280, 315, 355, 400, 450MM
BDH630: 315, 355, 400, 450, 500, 560, 630MM
BDH800: 500, 630, 710, 800MM
BDH1200: 630, 710, 800, 900, 1000, 1200MM
fitting fusion machine(fabrication of fittings)
BDHG315: 90, 110, 125, 140, 160, 180, 200, 225, 250, 280, 315MM
BDHG450: 250, 280, 315, 355, 400, 450MM
BDHG630: 315, 355, 400, 450, 500, 560, 630MM
BDHG800: 500, 630, 710, 800MM
BDHG1200: 630, 710, 800, 900, 1000, 1200MM
plastic pipe welding device SF-WM-003
plastic pipe welding device
pp-r welding device
welding device
SF-WM-003
plastic pipe welding device & pp-r welding device & welding device
Size: Dn20, Dn25, Dn32, Dn40, Dn50, Dn63
Voltage: 220v/110v
Power: 750w+750w 1500w
Temperature: 0-300°C
Units/Carton size: 44x27x9.5cm
Units/Weight: 5.5kg
5 Units installed/Carton size: 47x30x54cm
5 Units installed/Weight: 30kg
pp-r welding device
welding device
SF-WM-003
plastic pipe welding device & pp-r welding device & welding device
Size: Dn20, Dn25, Dn32, Dn40, Dn50, Dn63
Voltage: 220v/110v
Power: 750w+750w 1500w
Temperature: 0-300°C
Units/Carton size: 44x27x9.5cm
Units/Weight: 5.5kg
5 Units installed/Carton size: 47x30x54cm
5 Units installed/Weight: 30kg
plastic pipe welding machine
Component: 20-40MM sockets, screws, Screwdriver,hexagonal spanners.Using Manual.standing.Tape measure.gloves.pipe cutter.
Plastic welding with Steel case
Feature:
(1.) welding connector
(2.) Plastic pipe welding machine
(3.) Quality is excellent and professional. we have the certification.
(4.) Voltage: 220V±10%,frequency:50/60Hz; Power: 1400W
(5.) Component: 20-40MM sockets, screws, Screwdriver,hexagonal spanners.Using Manual.standing.Tape measure.gloves.pipe cutter.
(6.) The size of the moulds:20mm,25mm,32mm,40mm.
(8.) Pack list: 5pcs/CTN, 28.7/27.7KGS (G.W./N.W.), MEAS/CTN: 51X46X30CM
(9.) Up to 500pcs, appointed color box and alunimum brand and instruction.
Usage:
1. Fixed install heating-side welding head, the welding device placed on the shelves, according to specifications required to install the corresponding heating pipe die head, and pull tight with a hex generally small in the preceding paragraph, a large back-end.
2. Switch on the power (note the power supply must be protected with a ground line), according to the corresponding models of the machine to the instruction attention to light changes, until the welding temperature control device to enter the work state, can be started.
3. With vertical cutting device to cut off pipe tube, pipe and fittings will also promote the welding device with no moving within the die, as required for operation. Immediately after the heating time to reach pipes and fittings removed from the die head at the same time, rapidly rotating non-uniform insert directly to the desired depth, to form a uniform flange joints.
please inquire us for more information...
Plastic welding with Steel case
Feature:
(1.) welding connector
(2.) Plastic pipe welding machine
(3.) Quality is excellent and professional. we have the certification.
(4.) Voltage: 220V±10%,frequency:50/60Hz; Power: 1400W
(5.) Component: 20-40MM sockets, screws, Screwdriver,hexagonal spanners.Using Manual.standing.Tape measure.gloves.pipe cutter.
(6.) The size of the moulds:20mm,25mm,32mm,40mm.
(8.) Pack list: 5pcs/CTN, 28.7/27.7KGS (G.W./N.W.), MEAS/CTN: 51X46X30CM
(9.) Up to 500pcs, appointed color box and alunimum brand and instruction.
Usage:
1. Fixed install heating-side welding head, the welding device placed on the shelves, according to specifications required to install the corresponding heating pipe die head, and pull tight with a hex generally small in the preceding paragraph, a large back-end.
2. Switch on the power (note the power supply must be protected with a ground line), according to the corresponding models of the machine to the instruction attention to light changes, until the welding temperature control device to enter the work state, can be started.
3. With vertical cutting device to cut off pipe tube, pipe and fittings will also promote the welding device with no moving within the die, as required for operation. Immediately after the heating time to reach pipes and fittings removed from the die head at the same time, rapidly rotating non-uniform insert directly to the desired depth, to form a uniform flange joints.
please inquire us for more information...
plastic sealing and cutting machine
plastic sealing and cutting machine
1)plastic sealing
2)high-frequency welding
3)ISO9001:2008/CE
4)easy to use and operate
plastic sealing and cutting machine
Main characteristics:
Widely using in environmental protection plastic packing, toothbrush packing.
Environmental production dress-glue products with APET, PETG, GAG materials.
Equally can process any materials which need welding and cutting simultaneously.
Adjustable cutting pressure 1-50 ton, stable and reliable in output, firm in structure.
Adopting high sensitive anti-sparkle device NL5557 to avoid damaging the mould.
Technical Data
Model
GHW-5
GHW-8
GHW-15
High-frequency output
5KW
8KW
15KW
Oscillating frequency
27.12MHz
27.12MHz
27.12MHz
Power pressure
10KVA
16KVA
30KVA
Oscillating tube
7T85
7T69
3C×10000
Rectifier
Diode
Diode
Diode
Flow distance
110mm
110mm
110mm
Pressure (max)
5T
15T
20T
Size of upper plate
300×500mm
400×600mm
700×800mm
Size of lower plate
400×600mm
500×700mm
800×900mm
Gap of electrodes
110~250mm
110~250mm
110~250mm
Voltage
AC380V/50Hz
AC380V/50Hz
AC380V/50Hz
Machine size (L×W×H)
1900×1300×1850mm
2000×1300×1920mm
2405×1340×2470mm
weight
1500Kg
1600Kg
2000Kg
You can see our website for more product information, please don't hesitate to call.
Our advantage:
Our company insists the quality first, customer supreme idea, our superiority: One year and so on maintenance, three months and so on exchange guaranteed, life-long service.
1)plastic sealing
2)high-frequency welding
3)ISO9001:2008/CE
4)easy to use and operate
plastic sealing and cutting machine
Main characteristics:
Widely using in environmental protection plastic packing, toothbrush packing.
Environmental production dress-glue products with APET, PETG, GAG materials.
Equally can process any materials which need welding and cutting simultaneously.
Adjustable cutting pressure 1-50 ton, stable and reliable in output, firm in structure.
Adopting high sensitive anti-sparkle device NL5557 to avoid damaging the mould.
Technical Data
Model
GHW-5
GHW-8
GHW-15
High-frequency output
5KW
8KW
15KW
Oscillating frequency
27.12MHz
27.12MHz
27.12MHz
Power pressure
10KVA
16KVA
30KVA
Oscillating tube
7T85
7T69
3C×10000
Rectifier
Diode
Diode
Diode
Flow distance
110mm
110mm
110mm
Pressure (max)
5T
15T
20T
Size of upper plate
300×500mm
400×600mm
700×800mm
Size of lower plate
400×600mm
500×700mm
800×900mm
Gap of electrodes
110~250mm
110~250mm
110~250mm
Voltage
AC380V/50Hz
AC380V/50Hz
AC380V/50Hz
Machine size (L×W×H)
1900×1300×1850mm
2000×1300×1920mm
2405×1340×2470mm
weight
1500Kg
1600Kg
2000Kg
You can see our website for more product information, please don't hesitate to call.
Our advantage:
Our company insists the quality first, customer supreme idea, our superiority: One year and so on maintenance, three months and so on exchange guaranteed, life-long service.
plastic seaming machine
For welding plastic flex sheet made of PVC, PE, linoleum and modified thermoplastics. Light weight and portable design.
For welding plastic flex sheet made of PVC, PE, linoleum and modified thermoplastics. With potentiometer for welding speed and air temperature. Light weight and portable design. Easy use and maintenance.
Small, light and compact
Integrated wall switch
Adjustable airflow
Electronically controlled heating and drive
UNIFLOOR S 100-230 V
Attribute
Unit
Value
Voltage
V
100-230
Power consumption
W
2300
Frequency
Hz
50/60
Noise emission level LpA
dB
67
Size (L x W x H)
mm
420 x 270 x 215
Weight
kg
14.0
hot air seaming machine
hot air seam machine
hot air welding tool
hot air welding machine
hot air welder
pvc hot air welder
pvc hot air welding
pvc hot air welding machine
pvc hot air seaming machine
pvc hot air seam machine
tarpaulin seam machine
seaming tool
seaming machine
plastic seaming machine
seaming machine for cans
pvc seaming machine
seaming machine parts
seaming machine pvc
seaming machine roller
seaming carpet
seaming accessory
floor seaming machine
seaming roll
seaming tools
welded machine
welder machine
welder
welding machine
welder machine
hot air welder machine
hot wave welder machine
portable welder machine
leister welder machine
welder machine plastic
pvc welder machine
plastic welder machine
tarpaulin welder machine
welding tools
welding equipment
hot wind welder
hot wind welding machine
hot wind seaming machine
hot wind seam machine
welding machine
welder machine
hot air welder machine
hot wave welder machine
portable welder machine
leister welder machine
welder machine plastic
pvc welder machine
plastic welder machine
tarpaulin welder machine
welding tools
welding equipment
hot wind welder
hot wind welding machine
hot wind seaming machine
hot wind seam machine
hot air seam sealing machine
seam sealing machine
hot air sealing machine
flat seam machine
hot air welding machine
seam roller machine
filter seaming machine
Update Date:2011-9-28 5:50:40
For welding plastic flex sheet made of PVC, PE, linoleum and modified thermoplastics. With potentiometer for welding speed and air temperature. Light weight and portable design. Easy use and maintenance.
Small, light and compact
Integrated wall switch
Adjustable airflow
Electronically controlled heating and drive
UNIFLOOR S 100-230 V
Attribute
Unit
Value
Voltage
V
100-230
Power consumption
W
2300
Frequency
Hz
50/60
Noise emission level LpA
dB
67
Size (L x W x H)
mm
420 x 270 x 215
Weight
kg
14.0
hot air seaming machine
hot air seam machine
hot air welding tool
hot air welding machine
hot air welder
pvc hot air welder
pvc hot air welding
pvc hot air welding machine
pvc hot air seaming machine
pvc hot air seam machine
tarpaulin seam machine
seaming tool
seaming machine
plastic seaming machine
seaming machine for cans
pvc seaming machine
seaming machine parts
seaming machine pvc
seaming machine roller
seaming carpet
seaming accessory
floor seaming machine
seaming roll
seaming tools
welded machine
welder machine
welder
welding machine
welder machine
hot air welder machine
hot wave welder machine
portable welder machine
leister welder machine
welder machine plastic
pvc welder machine
plastic welder machine
tarpaulin welder machine
welding tools
welding equipment
hot wind welder
hot wind welding machine
hot wind seaming machine
hot wind seam machine
welding machine
welder machine
hot air welder machine
hot wave welder machine
portable welder machine
leister welder machine
welder machine plastic
pvc welder machine
plastic welder machine
tarpaulin welder machine
welding tools
welding equipment
hot wind welder
hot wind welding machine
hot wind seaming machine
hot wind seam machine
hot air seam sealing machine
seam sealing machine
hot air sealing machine
flat seam machine
hot air welding machine
seam roller machine
filter seaming machine
Update Date:2011-9-28 5:50:40
plastic welder for welding car lights(NK-S1542)
plastic welder:
1.Model: NK-S1542
2.Power: 4200-5600W
3.Air pressure: 4-6 kg/cm2
4200W Plastic Welder
Overview:
South Nekon machinery Co., Ltd. is a hi-tech joint venture and is located in the beautiful Shipai Town of Dongguan with extremely convenient traffic. Since the establishment, our company has been dedicated to the optimization and integration of developing, making, selling, service and application technology of ultrasonic machinery, and providing quality products and best solution for users.
We professionally produce standard
Plastic Welder
, such as 2600 W – 3200 W plastic welding machine, 4200 W – 5600 W high power plastic welding machine and other precision welding equipment: double-head plastic welder, six-head plastic welder, hollow plastic box welding machine, fence tube welding machine, hot plate plastic welding machine, rotary plastic welding machine, car door welding machine, car dashboard welding machine, car bumper welding machine, we also design and produce other non-standard automated plastic welding equipment for our customer.
Technology Data:
Model: NK-S1542
Frequency: 15 KHz
Voltage: 220 V
Power: 4200-5600 W
Dimensions: 800*1000*1850 mm
Welding Area: Φ280 mm
Weight: 200 Kg
Features of Plastic Welder:
1. Welding area for large and complex, welding the high requirements products, superior welding results;
2. Digital set welding parameters, intuitive accuracy;
3. Process of welding current and precision time control and improve the quality of welding;
4. Full set of high-quality imported components assembled stable performance.
Plastic welder-Working Detail:
Capacity: welding time is only 0.01-9.99 second
Strength: can bear more pressure and tension
Quality: finished product is hermetic sealing
Cost: non bolt or glue, reduce labor and costs
Plastic welder-Machine Details:
1. Original Japanese Imported transducer with strong, stable output;
2. Machine architecture with heavy machine locking device, the overall structure is solid, stable, and not easy to crack and degree of backwards is only 1/6 of the other locking device.
3. Display of swing and electricity makes the adjusting easy and intuitionistic.
4. Computer control system of dual language, high anti-interference ability, time accuracy is up to 0.01 seconds and easy to adjust.
Samples:
Applications of Plastic Welder:
Ultrasonic welding machine is widely used in automotive industry, electronic industry, medical industry, household appliances, woven apparel, office supplies, packaging industry, toy industry, and so on.
Automotive industry
: plastic body parts, car doors, automotive dashboard, lights, mirrors, sun visor, interior parts, filters, reflective material, reflective spike, bumper, cable, plastic filter for motorcycle , Radiator, brake fluid tank, oil cups, water tanks, fuel tank, air hose, exhaust purifiers, the tray plate, and so on.
Plastic Electronics
: prepaid water meters, communications equipment, cordless phones, mobile phone accessories, cell phone case, battery case, charger, maintenance valve regulated lead-acid batteries, 3-inch floppy disk, U disk, SD card, CF card, USB connection, Bluetooth devices, and so on.
Stationery: folder, album, folding boxes, PP hollow board, pen loops, ink cartridges, toner cartridges, and so on.
Medical and Daily products
: watches, kitchen utensils, oral liquid bottle caps, drip caps, mobile phone accessories, golden soft brush, and daily necessities, handle, security caps, cosmetics bottle, coffee pot, washing machines, air dehumidifiers, Electric irons, electric kettles, vacuum cleaners, speakers, cover and metal face grille and other civil engineering and so on.
Health products
: children's products, air mattresses, clothes hangers, gardening supplies, kitchenware sanitary ware, shower, shower head, and so on.
Typical customer:
Liteon Foxconn BYD Haier
TCL Lenovo Melox TTI
1.Model: NK-S1542
2.Power: 4200-5600W
3.Air pressure: 4-6 kg/cm2
4200W Plastic Welder
Overview:
South Nekon machinery Co., Ltd. is a hi-tech joint venture and is located in the beautiful Shipai Town of Dongguan with extremely convenient traffic. Since the establishment, our company has been dedicated to the optimization and integration of developing, making, selling, service and application technology of ultrasonic machinery, and providing quality products and best solution for users.
We professionally produce standard
Plastic Welder
, such as 2600 W – 3200 W plastic welding machine, 4200 W – 5600 W high power plastic welding machine and other precision welding equipment: double-head plastic welder, six-head plastic welder, hollow plastic box welding machine, fence tube welding machine, hot plate plastic welding machine, rotary plastic welding machine, car door welding machine, car dashboard welding machine, car bumper welding machine, we also design and produce other non-standard automated plastic welding equipment for our customer.
Technology Data:
Model: NK-S1542
Frequency: 15 KHz
Voltage: 220 V
Power: 4200-5600 W
Dimensions: 800*1000*1850 mm
Welding Area: Φ280 mm
Weight: 200 Kg
Features of Plastic Welder:
1. Welding area for large and complex, welding the high requirements products, superior welding results;
2. Digital set welding parameters, intuitive accuracy;
3. Process of welding current and precision time control and improve the quality of welding;
4. Full set of high-quality imported components assembled stable performance.
Plastic welder-Working Detail:
Capacity: welding time is only 0.01-9.99 second
Strength: can bear more pressure and tension
Quality: finished product is hermetic sealing
Cost: non bolt or glue, reduce labor and costs
Plastic welder-Machine Details:
1. Original Japanese Imported transducer with strong, stable output;
2. Machine architecture with heavy machine locking device, the overall structure is solid, stable, and not easy to crack and degree of backwards is only 1/6 of the other locking device.
3. Display of swing and electricity makes the adjusting easy and intuitionistic.
4. Computer control system of dual language, high anti-interference ability, time accuracy is up to 0.01 seconds and easy to adjust.
Samples:
Applications of Plastic Welder:
Ultrasonic welding machine is widely used in automotive industry, electronic industry, medical industry, household appliances, woven apparel, office supplies, packaging industry, toy industry, and so on.
Automotive industry
: plastic body parts, car doors, automotive dashboard, lights, mirrors, sun visor, interior parts, filters, reflective material, reflective spike, bumper, cable, plastic filter for motorcycle , Radiator, brake fluid tank, oil cups, water tanks, fuel tank, air hose, exhaust purifiers, the tray plate, and so on.
Plastic Electronics
: prepaid water meters, communications equipment, cordless phones, mobile phone accessories, cell phone case, battery case, charger, maintenance valve regulated lead-acid batteries, 3-inch floppy disk, U disk, SD card, CF card, USB connection, Bluetooth devices, and so on.
Stationery: folder, album, folding boxes, PP hollow board, pen loops, ink cartridges, toner cartridges, and so on.
Medical and Daily products
: watches, kitchen utensils, oral liquid bottle caps, drip caps, mobile phone accessories, golden soft brush, and daily necessities, handle, security caps, cosmetics bottle, coffee pot, washing machines, air dehumidifiers, Electric irons, electric kettles, vacuum cleaners, speakers, cover and metal face grille and other civil engineering and so on.
Health products
: children's products, air mattresses, clothes hangers, gardening supplies, kitchenware sanitary ware, shower, shower head, and so on.
Typical customer:
Liteon Foxconn BYD Haier
TCL Lenovo Melox TTI
plastic welding equipment
plastic welding equipment,plastic welding equipment high frequency welding have many funtioins. It is save covering designing.
plastic welding equipment,plastic welding equipment have many funtioins. It is save covering designing. Environment protecting apet, PP plastic soft track pressing to form model. Plastic and paper card sealing, special material sealing.
Machine pharameter
Suit for size 400*500 mm
Welding,cutting speed 300-600pcs/hour
Material thickness 0.2-0.6mm
precise ≤±0.001MM
Air press 0.6Mpa 350L/min
weight 2300 Kg
Total power 380VAC(three phrases ) 8KW
size 2800*2000*2500(L*W*H)
suit for APET,PETG,PVC
blister max size 400*500MM
different shape need professinal mould supplier make.(soft crease use laiser wooden knife mould
welding cutting speed 300-600units/h (depend on the worker who putting the material speed)can use two workers working at the same time, one upload the material, one download material, will be faster.
HFplastic welding machine is a plastic heat sealing device of choice. The main principle of profit and the high amount of plastic field will again reverse the polarity of molecules to generate friction heat, and thus achieve the purpose of welding, the welding temperature is uniform table. Any PVC or APET content> 10% of the plastic sheet material, regardless of how hard and soft, can use high frequency plastic welding machine heat sealing.
plastic welding equipment,plastic welding equipment have many funtioins. It is save covering designing. Environment protecting apet, PP plastic soft track pressing to form model. Plastic and paper card sealing, special material sealing.
Machine pharameter
Suit for size 400*500 mm
Welding,cutting speed 300-600pcs/hour
Material thickness 0.2-0.6mm
precise ≤±0.001MM
Air press 0.6Mpa 350L/min
weight 2300 Kg
Total power 380VAC(three phrases ) 8KW
size 2800*2000*2500(L*W*H)
suit for APET,PETG,PVC
blister max size 400*500MM
different shape need professinal mould supplier make.(soft crease use laiser wooden knife mould
welding cutting speed 300-600units/h (depend on the worker who putting the material speed)can use two workers working at the same time, one upload the material, one download material, will be faster.
HFplastic welding machine is a plastic heat sealing device of choice. The main principle of profit and the high amount of plastic field will again reverse the polarity of molecules to generate friction heat, and thus achieve the purpose of welding, the welding temperature is uniform table. Any PVC or APET content> 10% of the plastic sheet material, regardless of how hard and soft, can use high frequency plastic welding machine heat sealing.
plastic welding gun
copy of Leiste, same function low price
The pressure is stable and the temperature is adjustable. The welding efficiency is high, the distance between the main engine and the weld torch amounts to 4 meters. Thus has satisfied the welding temperature of different quality plastic material and welding rods of different specification. It is the ideal tool for the plastic welding of various thermoplastic material.
Rated voltage: 220v
Insulating intensity: 1500v
Rated frequency: 50hz
Air volume: 10m3/h
Max power: 2000w
Air pressure: 0.04mpa
Temperature scope: 40-650degree
The pressure is stable and the temperature is adjustable. The welding efficiency is high, the distance between the main engine and the weld torch amounts to 4 meters. Thus has satisfied the welding temperature of different quality plastic material and welding rods of different specification. It is the ideal tool for the plastic welding of various thermoplastic material.
Rated voltage: 220v
Insulating intensity: 1500v
Rated frequency: 50hz
Air volume: 10m3/h
Max power: 2000w
Air pressure: 0.04mpa
Temperature scope: 40-650degree
plastic welding machine
Model: NK-S1520
Frequency: 15 KHz
Voltage: 220 V
Power: 2000 W
plastic welding machine
NK-S1520
Overview:
South Nekon machinery Co., Ltd. is a hi-tech joint venture and is located in the beautiful Shipai Town of Dongguan with extremely convenient traffic. Since the establishment, our company has been dedicated to the optimization and integration of developing, making, selling, service and application technology of ultrasonic machinery, and providing quality products and best solution for users.
We professionally produce standard plastic welding machine, such as 2600 W – 3200 W plastic welding machine, 4200 W – 5600 W high power plastic welding machine and other precision welding equipment: double-head plastic welder, six-head plastic welder, hollow plastic box welding machine, fence tube welding machine, hot plate plastic welding machine, rotary plastic welding machine, car door welding machine, car dashboard welding machine, car bumper welding machine, we also design and produce other non-standard automated plastic welding equipment for our customer.
15 KHz normative ultrasonic welding machine conducts ultrasound to the plastic parts by the welding head melts the point contact between the parts, creating a joint. This technology has the advantages of rapid and strong, more importantly, it can make the manufacturing automatic. Ultrasonic welding machine can be used for welding, implanting, forming, riveting, spot welding, removaling, and sewing.
Technology Data:
Model: NK-S1520
Frequency: 15 KHz
Voltage: 220 V
Power: 2000 W
Dimensions: 800*1000*1850 mm
Capacity: 10-20 times/min
Welding Area: Φ 220 mm
Air Pressure: 4-6 kg/cm2
Weight: 80 Kg
Features of ultrasonic plastic welding machine:
1. Japanese NTK transducer, imported cylinder, stronger power and more stability;
2. Frequency can display automatically when machine works;
3. Dial indicator scale display, mould frames accurately and quickly;
4. Digital control, time accuracy can be millisecond;
5. Base level condition, mould frames quickly.
Working Detail:
1.Capacity: welding time is only 0.01-9.99 second
2.Strength: can bear more pressure and tension
3.Quality: finished product is hermetic sealing
4.Cost: non bolt or glue, reduce labor and costs
Machine Details:
1.Computer control system of dual language, high anti-interference ability, time accuracy is up to 0.01 seconds and easy to adjust;
2.Display of swing and electricity makes the adjusting easy and intuitionist;
3.Twisting the screws around to adjust the level of the mould, convenient and ease to operatre;
4.Machine architecture with heavy machine locking device, the overall structure is solid, stable, and not easy to crack and degree of backwards is only 1/6 of the other locking device.
5.Original Japanese Imported transducer with strong, stable output;
Applications:
Ultrasonic welding machine is widely used in automotive industry, electronic industry, medical industry, household appliances, woven apparel, office supplies, packaging industry, toy industry, and so on.
Frequency: 15 KHz
Voltage: 220 V
Power: 2000 W
plastic welding machine
NK-S1520
Overview:
South Nekon machinery Co., Ltd. is a hi-tech joint venture and is located in the beautiful Shipai Town of Dongguan with extremely convenient traffic. Since the establishment, our company has been dedicated to the optimization and integration of developing, making, selling, service and application technology of ultrasonic machinery, and providing quality products and best solution for users.
We professionally produce standard plastic welding machine, such as 2600 W – 3200 W plastic welding machine, 4200 W – 5600 W high power plastic welding machine and other precision welding equipment: double-head plastic welder, six-head plastic welder, hollow plastic box welding machine, fence tube welding machine, hot plate plastic welding machine, rotary plastic welding machine, car door welding machine, car dashboard welding machine, car bumper welding machine, we also design and produce other non-standard automated plastic welding equipment for our customer.
15 KHz normative ultrasonic welding machine conducts ultrasound to the plastic parts by the welding head melts the point contact between the parts, creating a joint. This technology has the advantages of rapid and strong, more importantly, it can make the manufacturing automatic. Ultrasonic welding machine can be used for welding, implanting, forming, riveting, spot welding, removaling, and sewing.
Technology Data:
Model: NK-S1520
Frequency: 15 KHz
Voltage: 220 V
Power: 2000 W
Dimensions: 800*1000*1850 mm
Capacity: 10-20 times/min
Welding Area: Φ 220 mm
Air Pressure: 4-6 kg/cm2
Weight: 80 Kg
Features of ultrasonic plastic welding machine:
1. Japanese NTK transducer, imported cylinder, stronger power and more stability;
2. Frequency can display automatically when machine works;
3. Dial indicator scale display, mould frames accurately and quickly;
4. Digital control, time accuracy can be millisecond;
5. Base level condition, mould frames quickly.
Working Detail:
1.Capacity: welding time is only 0.01-9.99 second
2.Strength: can bear more pressure and tension
3.Quality: finished product is hermetic sealing
4.Cost: non bolt or glue, reduce labor and costs
Machine Details:
1.Computer control system of dual language, high anti-interference ability, time accuracy is up to 0.01 seconds and easy to adjust;
2.Display of swing and electricity makes the adjusting easy and intuitionist;
3.Twisting the screws around to adjust the level of the mould, convenient and ease to operatre;
4.Machine architecture with heavy machine locking device, the overall structure is solid, stable, and not easy to crack and degree of backwards is only 1/6 of the other locking device.
5.Original Japanese Imported transducer with strong, stable output;
Applications:
Ultrasonic welding machine is widely used in automotive industry, electronic industry, medical industry, household appliances, woven apparel, office supplies, packaging industry, toy industry, and so on.
Best machine KHBL8-80 Automatic orbit Argon welder arc machine
welder arc
-Stable IGBT TIG performance
-Stable performance,tube plate welders
-Automatic Argon Arc TIG welders
-Good price
Best machine KHBL8-80A Automatic orbit Argon
welder arc
machine
1.Product Information
Technical parameters
Mains Voltage(3-Phases 50/60Hz)
380V
Rated power input
9KW
Rated input capacity
11.5KVA
Suitable Dia.
8-80mm
Filler Wire Speed
0~1500mm/min
Welding Speed
0.5~5rpm
Frequency
50-60HZ
Rated load sustained rate
60%
Weldable wall thickness
0.5—6.5mm
Tube biggest stretch out length
10mm
Tube biggest indented length
2mm
Welding current adjusting range
4—400A
Pulse frequency
0.5—500HZ
Wire adjustable Angle
<45°
Welding speed
0.1—1.5m/min
Cooling water pressure
1.2kg.f/mm²
Tungsten pole adjustable Angle
<45°
Lateral movement trip
1500mm
Vertical motion stroke
1200mm
Axial movement trip
300mm
Transverse fine-tuning
40mm
Vertical fine-tuning
60mm
Axial fine-tuning
100mm
Note:
1. The above data is only for the customer’s reference.
2. The technical parameters can be customized according to the customer's requirement.
3. We reserve the rights to amend the technical specification here without prior notice.
2.
Details Pics
Machine Picture
Welding head
PLC touch screen
Welding effect
Application
3.Introduction
Function & characteristics
1,Suitable for various kinds of tube-tube plate assembly method;
2,The welding head can on the surface doing a 180 degree rotated, convenient to replace tungsten pole and wire fine-tuning operation; etc.
3,Head of water, electricity, USES the winding way, welding can continuous rotary, cooperate the arc length adjustment, which can realize multilayer welding,
4,By Panasonic IGBT inverter control dc pulse power, high efficiency, arc welding strong stability, weld bead molding beauty,
Operate
All welding parameters fully programmable.
Up to 100 program storage.
4.Certificate
Contact Us:
We are sure we have an exciting cooperation, and reach a win-win stage!
-Stable IGBT TIG performance
-Stable performance,tube plate welders
-Automatic Argon Arc TIG welders
-Good price
Best machine KHBL8-80A Automatic orbit Argon
welder arc
machine
1.Product Information
Technical parameters
Mains Voltage(3-Phases 50/60Hz)
380V
Rated power input
9KW
Rated input capacity
11.5KVA
Suitable Dia.
8-80mm
Filler Wire Speed
0~1500mm/min
Welding Speed
0.5~5rpm
Frequency
50-60HZ
Rated load sustained rate
60%
Weldable wall thickness
0.5—6.5mm
Tube biggest stretch out length
10mm
Tube biggest indented length
2mm
Welding current adjusting range
4—400A
Pulse frequency
0.5—500HZ
Wire adjustable Angle
<45°
Welding speed
0.1—1.5m/min
Cooling water pressure
1.2kg.f/mm²
Tungsten pole adjustable Angle
<45°
Lateral movement trip
1500mm
Vertical motion stroke
1200mm
Axial movement trip
300mm
Transverse fine-tuning
40mm
Vertical fine-tuning
60mm
Axial fine-tuning
100mm
Note:
1. The above data is only for the customer’s reference.
2. The technical parameters can be customized according to the customer's requirement.
3. We reserve the rights to amend the technical specification here without prior notice.
2.
Details Pics
Machine Picture
Welding head
PLC touch screen
Welding effect
Application
3.Introduction
Function & characteristics
1,Suitable for various kinds of tube-tube plate assembly method;
2,The welding head can on the surface doing a 180 degree rotated, convenient to replace tungsten pole and wire fine-tuning operation; etc.
3,Head of water, electricity, USES the winding way, welding can continuous rotary, cooperate the arc length adjustment, which can realize multilayer welding,
4,By Panasonic IGBT inverter control dc pulse power, high efficiency, arc welding strong stability, weld bead molding beauty,
Operate
All welding parameters fully programmable.
Up to 100 program storage.
4.Certificate
Contact Us:
We are sure we have an exciting cooperation, and reach a win-win stage!
plastic welding machine
plastic welding pipe welding welding machine20-40MM sockets, screws, Screwdriver,hexagonal spanners.Using Manual.standing.
plastic welding pipe welding welding machine welding device
Feature:
(1.) welding connector
(2.) Plastic pipe welding machine
(3.) Quality is excellent and professional. we have adopted CE certification.
(4.) Voltage: 110/220V,frequency:50/60Hz; Power: 1600W
(5.) Component: 20-40MM sockets, screws, Screwdriver,hexagonal spanners.Using Manual.standing.Tape measure.gloves.pipe cutter.lever.
(6.) The size of the moulds:20mm,25mm,32mm,40mm
(7.) Pack list: 5pcs/CTN, 25/24KGS(color box)24.5/24KGS(Bubble bag)
(8.) Up to 500pcs, appointed color box and alunimum brand and instruction.MEAS/CTN: 51.5X41.5X29.5CM(color box)/51X40X29CM(Bubble bag)
(9.)We have two cable connectors available
Certification: CE
steel case with 4or7 pairs moulds, alunimum brandPlastic welding
Usage:
1. Fixed install heating-side welding head, the welding device placed on the shelves, according to specifications required to install the corresponding heating pipe die head, and pull tight with a hex generally small in the preceding paragraph, a large back-end.
2. Switch on the power (note the power supply must be protected with a ground line), according to the corresponding models of the machine to the instruction attention to light changes, until the welding temperature control device to enter the work state, can be started.
3. With vertical cutting device to cut off pipe tube, pipe and fittings will also promote the welding device with no moving within the die, as required for operation. Immediately after the heating time to reach pipes and fittings removed from the die head at the same time, rapidly rotating non-uniform insert directly to the desired depth, to form a uniform flange joints.
inquire us for more information...
plastic welding pipe welding welding machine welding device
Feature:
(1.) welding connector
(2.) Plastic pipe welding machine
(3.) Quality is excellent and professional. we have adopted CE certification.
(4.) Voltage: 110/220V,frequency:50/60Hz; Power: 1600W
(5.) Component: 20-40MM sockets, screws, Screwdriver,hexagonal spanners.Using Manual.standing.Tape measure.gloves.pipe cutter.lever.
(6.) The size of the moulds:20mm,25mm,32mm,40mm
(7.) Pack list: 5pcs/CTN, 25/24KGS(color box)24.5/24KGS(Bubble bag)
(8.) Up to 500pcs, appointed color box and alunimum brand and instruction.MEAS/CTN: 51.5X41.5X29.5CM(color box)/51X40X29CM(Bubble bag)
(9.)We have two cable connectors available
Certification: CE
steel case with 4or7 pairs moulds, alunimum brandPlastic welding
Usage:
1. Fixed install heating-side welding head, the welding device placed on the shelves, according to specifications required to install the corresponding heating pipe die head, and pull tight with a hex generally small in the preceding paragraph, a large back-end.
2. Switch on the power (note the power supply must be protected with a ground line), according to the corresponding models of the machine to the instruction attention to light changes, until the welding temperature control device to enter the work state, can be started.
3. With vertical cutting device to cut off pipe tube, pipe and fittings will also promote the welding device with no moving within the die, as required for operation. Immediately after the heating time to reach pipes and fittings removed from the die head at the same time, rapidly rotating non-uniform insert directly to the desired depth, to form a uniform flange joints.
inquire us for more information...
plastic welding machine
the welding devices(plastic pipe welding machine) is an upscale welding machine,it's equiped 3moulds of its diameter size 20-32m
welding devices plastic pipe welding machine pipe welding
Feature:
(1.) welding connector
(2.) Plastic pipe welding machine
(3.) Quality is excellent and professional.
(4.) Voltage: 220V±10%,frequency:50/60Hz; Power: 600W
(5.) Component: 20-32MM sockets, screws, Screwdriver,hexagonal spanners.Using Manual.standing.
Usage:
1. Fixed install heating-side welding head, the welding device placed on the shelves, according to specifications required to install the corresponding heating pipe die head, and pull tight with a hex generally small in the preceding paragraph, a large back-end.
2. Switch on the power (note the power supply must be protected with a ground line), according to the corresponding models of the machine to the instruction attention to light changes, until the welding temperature control device to enter the work state, can be started.
3. With vertical cutting device to cut off pipe tube, pipe and fittings will also promote the welding device with no moving within the die, as required for operation. Immediately after the heating time to reach pipes and fittings removed from the die head at the same time, rapidly rotating non-uniform insert directly to the desired depth, to form a uniform flange joints.
please inquire us for more information...
welding devices plastic pipe welding machine pipe welding
Feature:
(1.) welding connector
(2.) Plastic pipe welding machine
(3.) Quality is excellent and professional.
(4.) Voltage: 220V±10%,frequency:50/60Hz; Power: 600W
(5.) Component: 20-32MM sockets, screws, Screwdriver,hexagonal spanners.Using Manual.standing.
Usage:
1. Fixed install heating-side welding head, the welding device placed on the shelves, according to specifications required to install the corresponding heating pipe die head, and pull tight with a hex generally small in the preceding paragraph, a large back-end.
2. Switch on the power (note the power supply must be protected with a ground line), according to the corresponding models of the machine to the instruction attention to light changes, until the welding temperature control device to enter the work state, can be started.
3. With vertical cutting device to cut off pipe tube, pipe and fittings will also promote the welding device with no moving within the die, as required for operation. Immediately after the heating time to reach pipes and fittings removed from the die head at the same time, rapidly rotating non-uniform insert directly to the desired depth, to form a uniform flange joints.
please inquire us for more information...
plastic welding machine
plastic welding pipe welding welding machine sockets, screws, Screwdriver,hexagonal spanners.Using Manual.standing.Tape measure.
plastic welding welding machine pipe welding
Feature:
(1.) welding connector
(2.) Plastic pipe welding machine
(3.) Quality is excellent and professional. we have adopted CE certification.
(4.) Voltage: 110/220V,frequency:50/60Hz; Power: 1600W
(5.) Component: 20-63MM sockets, screws, Screwdriver,hexagonal spanners.Using Manual.standing.Tape measure.gloves.pipe cutter.
(6.) The size of the moulds:20mm,25mm,32mm,40mm,50mm,63mm.
(7.) Pack list: 4pcs/CTN
(8.) Up to 500pcs, appointed color box and alunimum brand and instruction.MEAS/CTN: 51.5X41.5X29.5CM(color box)/51X40X29CM(Bubble bag)
(9.)We have two cable connectors available
Certification: CE
steel case with 4or7 pairs moulds, alunimum brand Plastic welding
Usage:
1. Fixed install heating-side welding head, the welding device placed on the shelves, according to specifications required to install the corresponding heating pipe die head, and pull tight with a hex generally small in the preceding paragraph, a large back-end.
2. Switch on the power (note the power supply must be protected with a ground line), according to the corresponding models of the machine to the instruction attention to light changes, until the welding temperature control device to enter the work state, can be started.
3. With vertical cutting device to cut off pipe tube, pipe and fittings will also promote the welding device with no moving within the die, as required for operation. Immediately after the heating time to reach pipes and fittings removed from the die head at the same time, rapidly rotating non-uniform insert directly to the desired depth, to form a uniform flange joints.
please inquire us for more information...
plastic welding welding machine pipe welding
Feature:
(1.) welding connector
(2.) Plastic pipe welding machine
(3.) Quality is excellent and professional. we have adopted CE certification.
(4.) Voltage: 110/220V,frequency:50/60Hz; Power: 1600W
(5.) Component: 20-63MM sockets, screws, Screwdriver,hexagonal spanners.Using Manual.standing.Tape measure.gloves.pipe cutter.
(6.) The size of the moulds:20mm,25mm,32mm,40mm,50mm,63mm.
(7.) Pack list: 4pcs/CTN
(8.) Up to 500pcs, appointed color box and alunimum brand and instruction.MEAS/CTN: 51.5X41.5X29.5CM(color box)/51X40X29CM(Bubble bag)
(9.)We have two cable connectors available
Certification: CE
steel case with 4or7 pairs moulds, alunimum brand Plastic welding
Usage:
1. Fixed install heating-side welding head, the welding device placed on the shelves, according to specifications required to install the corresponding heating pipe die head, and pull tight with a hex generally small in the preceding paragraph, a large back-end.
2. Switch on the power (note the power supply must be protected with a ground line), according to the corresponding models of the machine to the instruction attention to light changes, until the welding temperature control device to enter the work state, can be started.
3. With vertical cutting device to cut off pipe tube, pipe and fittings will also promote the welding device with no moving within the die, as required for operation. Immediately after the heating time to reach pipes and fittings removed from the die head at the same time, rapidly rotating non-uniform insert directly to the desired depth, to form a uniform flange joints.
please inquire us for more information...
plc system pipe pipe sheet automatic igbt orbital tig fusion welding equipment
1,Professional pipe sheet welding
2,400A Panasonic power
3,Three-point supporting nose
4,ISO9001
5,more 15 years experiences
Plc system pipepipe sheet automatic igbt orbital tig fusion welding machine
Welding Host and welding head
Product function
Used for welding of flush, protruding, recessed tubes or welding behind the tube-plate.
1,Suitable for various kinds of tube-tube plate assembly method.
2,Weld head compact structure, small volume. Using elastic and positioning mandrel, three supporting frame, can make the circumferential, axial and radial adjusting, quick accurate! Imported motor and transmission institutions make head movements more reliable!
3,Program-controlled system humanist, the operation is simple, friendly man-machine interface, can be stored up to 99 welding standard, each group of welding standard can be divided into 1-16 segment, input simple, without professional basis and special language!
4,IGBT power inverter control dc pulsed current and welding arc stability of high efficiency, strong, weld bead molding beauty!
5,Mandatory water cooling system, not affected by field hydraulic conditions such as restrictions, cooling fully, reliable convenient.
6,The cars type integration design, mobile free and easy to use.
Main Technical Specifications
Rated input voltage
380V
Rated input capacity
14KVA
Rated power input
12.5KW
Voltage allow fluctuating range
380±10%
Phase number
Three-phase
Frequency
50/60HZ
Rated load sustained rate
60%
Rated welding voltage
TIG welding 22.6V
Weld able tube diameter
12-80mm
Weld able wall thickness
1-6.5mm
Tube biggest stretch out length
8mm
Tube biggest indented length
2mm
Welding current adjusting range
4-315A
Pulse frequency
0.5-500HZ
Wire feeding speed
0.1-1.5m/min
Welding speed
50-150mm/min
Cooling water pressure
1.2kg.f/mm²
Main Markets:
North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid ,East, Eastern Asia, Western Europe, Central America, Northern Europe, Southern Europe
Management Certification:
ISO 9001:2000 ISO 9001:2008 QS-9000
Contract Manufacturing:
OEM Service Offered Design Service Offered
Welding processing
7 Patents & 4 Software copyrights
Contact Us:
Amy zhang
Tel:86-371-67997190/91 86-15003850417 Fax:67986002
Web:www.zzkehui.com.cn
2,400A Panasonic power
3,Three-point supporting nose
4,ISO9001
5,more 15 years experiences
Plc system pipepipe sheet automatic igbt orbital tig fusion welding machine
Welding Host and welding head
Product function
Used for welding of flush, protruding, recessed tubes or welding behind the tube-plate.
1,Suitable for various kinds of tube-tube plate assembly method.
2,Weld head compact structure, small volume. Using elastic and positioning mandrel, three supporting frame, can make the circumferential, axial and radial adjusting, quick accurate! Imported motor and transmission institutions make head movements more reliable!
3,Program-controlled system humanist, the operation is simple, friendly man-machine interface, can be stored up to 99 welding standard, each group of welding standard can be divided into 1-16 segment, input simple, without professional basis and special language!
4,IGBT power inverter control dc pulsed current and welding arc stability of high efficiency, strong, weld bead molding beauty!
5,Mandatory water cooling system, not affected by field hydraulic conditions such as restrictions, cooling fully, reliable convenient.
6,The cars type integration design, mobile free and easy to use.
Main Technical Specifications
Rated input voltage
380V
Rated input capacity
14KVA
Rated power input
12.5KW
Voltage allow fluctuating range
380±10%
Phase number
Three-phase
Frequency
50/60HZ
Rated load sustained rate
60%
Rated welding voltage
TIG welding 22.6V
Weld able tube diameter
12-80mm
Weld able wall thickness
1-6.5mm
Tube biggest stretch out length
8mm
Tube biggest indented length
2mm
Welding current adjusting range
4-315A
Pulse frequency
0.5-500HZ
Wire feeding speed
0.1-1.5m/min
Welding speed
50-150mm/min
Cooling water pressure
1.2kg.f/mm²
Main Markets:
North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid ,East, Eastern Asia, Western Europe, Central America, Northern Europe, Southern Europe
Management Certification:
ISO 9001:2000 ISO 9001:2008 QS-9000
Contract Manufacturing:
OEM Service Offered Design Service Offered
Welding processing
7 Patents & 4 Software copyrights
Contact Us:
Amy zhang
Tel:86-371-67997190/91 86-15003850417 Fax:67986002
Web:www.zzkehui.com.cn
pluse mig welding machine
Multiple functions
Excellent coherence and stability
High reliability
High accuracy of control
Good applicability
Multiple functions digital inverting welding machine
The leading digital Inverting welding machine in China
Obtain patent, patent number:
ZL 2008 2 0076183.5(Double-pulsed GMAW)
ZL 2008 1 0054660.2(Multiple functions digital Inverting welding machine)
ZL 2009 3 0125321.4(Control panel for electric welder)
Certificate: CE, CCC, EMC, ISO9001:2000
Color: Available
Brand: Nebula
Packing: Carton package, plastic bag, foam
Usage: low-carbon steel, aluminum and its alloy, stainless steel, Copper, and etc
Application Fields: Exhaust pipe, Steel bedstead, laser printer body frame, chair foot, heavy vehicle, Forklift fuel tank, public bus carcass, rail locomotive, Stainless steel carcass, storage rack, golf club head, Cyclostyle carcass, machineshop truck car hopper, Electron production facility, conveyer belt component, Office billboard, Office clamp, aluminum alloy window frame, automobile parts, aluminum alloy control cabinet, Car roof, clutch, autolift, fuel tank, bogie, aluminum patio furniture, Stainless kitchen, baking equipment and etc
Nebula series multiple functions digital Inverting welding machine has many advantages as following:
1. Multiple functions:
Nebula series of eight-function digital welding machine contain 8 single welding methods: MMA, DC-argon arc welding, pulsed-argon arc welding, argon arc spot welding, GMAW(CO2/MIG/MAG), pulsed-GMAW, double-pulsed GMAW, arc carbon gas cutting welder and contain welding method consisted of any functions in above 8, that is different welding functions are embodied in the same one welding machine.
The clients can invert the welding function according to own request in the same one welding machine, which saves much money.
The nebula series of eight-functions welding machine has many menus: date and time display, welding machine temperature(the main power parts), instructions, welding record, memory and recall of parameters, remote control and network application etc, that provide much more convenience for users
2. Excellent coherence and stability:
Compared with the traditional simulating-control circuit welding machine, the digital welding machine is insensitive to the change of temperature, humidity or time, its performance is more stable, as well as better trouble-resistant capacity and coherence.
3. High reliability:
The function of digital welding machine is controlled by software, so changing software can add more functions to the welding machine and the activity do not influence the primary function and capacity. As well, the digital welding machine has the protective function of under-voltage and over-voltage and over-heat.
4. High accuracy of control:
The simulating control is difficult to get the accurate control, whereas the accuracy of digitized control is only related to the quantification lapse and the limited word length of the system, so the digitized control can obtain the high accuracy.
5. Good applicability:
The series of Nebula welding machines do not have high demand for the quality of input power, the machines can be operable under the input voltage between 260V and 460V, and they suit to different outdoor working place.
6. Authoritative welding expert database:
The nebula has stored the expert databases. Users can weld by using the expert databases which are as prominent as the international welding expert.
7. Long-distance software upgrade:
Nebula carries out the long-distance upgrade through internet. The user can add other welding functions to welding machine, and improve the welding performance by software upgrade.
8. Long-distance diagnosis function:
Nebula can realize the long-distance diagnosis through internet. When the user’s welding machine does not work, the nebula company will find the fault in time and repair the user’s welding machine.
9. Long-distance control function:
Nebula can carry out the long-distance control through internet as well as the local automatic control.
10. Long-distance monitoring function:
Nebula can carry out the long-distance monitoring function through internet, and user in any part of the world can see their machines actual wave of electric current and voltage and all parameters.
11. Handy performance:
Taking the requirements of different users into consideration, the series of nebula products furnish many ways of operating welding torch, the user’s self-definition, and various striking arc ways.
12. LCD and digital display:
With the two kinds of demonstrations: LCD and digital, the parameter set will be shown apparently in LCD display in English or in Chinese, so the menu operation is very convenient, fast and intuitive.
13. Energy-saving and small volume:
Our machine adopts the improved IGBT inverting technology which has diminished the entire power source volume and weight, greatly reduced the loss of copper and iron, and thus increased the power source, efficiency and the power factor. It has the function of checking interior temperature of welding machine. So its energy-saving achievement is remarkable.
14. Good ventilation system:
The nebula welding machine adopts first grade metallic directional blower. Its high temperature-resistant ability is very well and also has the ability to control temperature, save power and diminish noise.
15. Multi-language menu:
There are different language on the display, such as Chinese, English, Spanish, Polish and etc, which is much easy and useful for client’s usage.
Excellent coherence and stability
High reliability
High accuracy of control
Good applicability
Multiple functions digital inverting welding machine
The leading digital Inverting welding machine in China
Obtain patent, patent number:
ZL 2008 2 0076183.5(Double-pulsed GMAW)
ZL 2008 1 0054660.2(Multiple functions digital Inverting welding machine)
ZL 2009 3 0125321.4(Control panel for electric welder)
Certificate: CE, CCC, EMC, ISO9001:2000
Color: Available
Brand: Nebula
Packing: Carton package, plastic bag, foam
Usage: low-carbon steel, aluminum and its alloy, stainless steel, Copper, and etc
Application Fields: Exhaust pipe, Steel bedstead, laser printer body frame, chair foot, heavy vehicle, Forklift fuel tank, public bus carcass, rail locomotive, Stainless steel carcass, storage rack, golf club head, Cyclostyle carcass, machineshop truck car hopper, Electron production facility, conveyer belt component, Office billboard, Office clamp, aluminum alloy window frame, automobile parts, aluminum alloy control cabinet, Car roof, clutch, autolift, fuel tank, bogie, aluminum patio furniture, Stainless kitchen, baking equipment and etc
Nebula series multiple functions digital Inverting welding machine has many advantages as following:
1. Multiple functions:
Nebula series of eight-function digital welding machine contain 8 single welding methods: MMA, DC-argon arc welding, pulsed-argon arc welding, argon arc spot welding, GMAW(CO2/MIG/MAG), pulsed-GMAW, double-pulsed GMAW, arc carbon gas cutting welder and contain welding method consisted of any functions in above 8, that is different welding functions are embodied in the same one welding machine.
The clients can invert the welding function according to own request in the same one welding machine, which saves much money.
The nebula series of eight-functions welding machine has many menus: date and time display, welding machine temperature(the main power parts), instructions, welding record, memory and recall of parameters, remote control and network application etc, that provide much more convenience for users
2. Excellent coherence and stability:
Compared with the traditional simulating-control circuit welding machine, the digital welding machine is insensitive to the change of temperature, humidity or time, its performance is more stable, as well as better trouble-resistant capacity and coherence.
3. High reliability:
The function of digital welding machine is controlled by software, so changing software can add more functions to the welding machine and the activity do not influence the primary function and capacity. As well, the digital welding machine has the protective function of under-voltage and over-voltage and over-heat.
4. High accuracy of control:
The simulating control is difficult to get the accurate control, whereas the accuracy of digitized control is only related to the quantification lapse and the limited word length of the system, so the digitized control can obtain the high accuracy.
5. Good applicability:
The series of Nebula welding machines do not have high demand for the quality of input power, the machines can be operable under the input voltage between 260V and 460V, and they suit to different outdoor working place.
6. Authoritative welding expert database:
The nebula has stored the expert databases. Users can weld by using the expert databases which are as prominent as the international welding expert.
7. Long-distance software upgrade:
Nebula carries out the long-distance upgrade through internet. The user can add other welding functions to welding machine, and improve the welding performance by software upgrade.
8. Long-distance diagnosis function:
Nebula can realize the long-distance diagnosis through internet. When the user’s welding machine does not work, the nebula company will find the fault in time and repair the user’s welding machine.
9. Long-distance control function:
Nebula can carry out the long-distance control through internet as well as the local automatic control.
10. Long-distance monitoring function:
Nebula can carry out the long-distance monitoring function through internet, and user in any part of the world can see their machines actual wave of electric current and voltage and all parameters.
11. Handy performance:
Taking the requirements of different users into consideration, the series of nebula products furnish many ways of operating welding torch, the user’s self-definition, and various striking arc ways.
12. LCD and digital display:
With the two kinds of demonstrations: LCD and digital, the parameter set will be shown apparently in LCD display in English or in Chinese, so the menu operation is very convenient, fast and intuitive.
13. Energy-saving and small volume:
Our machine adopts the improved IGBT inverting technology which has diminished the entire power source volume and weight, greatly reduced the loss of copper and iron, and thus increased the power source, efficiency and the power factor. It has the function of checking interior temperature of welding machine. So its energy-saving achievement is remarkable.
14. Good ventilation system:
The nebula welding machine adopts first grade metallic directional blower. Its high temperature-resistant ability is very well and also has the ability to control temperature, save power and diminish noise.
15. Multi-language menu:
There are different language on the display, such as Chinese, English, Spanish, Polish and etc, which is much easy and useful for client’s usage.
pneumatic industrial mesh welding machine
pneumatic industrial mesh welding machine
Consist of mesh welding part and mesh cutting part,controlled by PLC and touch screen
pneumatic industrial mesh welding machine
Characteristics:
Pneumatic mesh machine is made up of pneumatic mesh welding machine and pneumatic mesh cutting machine. It adopts computer control to realize precise welding time, balanced current and low failure
1. Main welding machine adopts famous imported pneumatic component to achieve long service life, high precision, great pressure, and tight welding spot.
2. Welding transformer applies new high efficient welding transformer with eight shifting grades that expand welding wire diameter range.
4. Control system is served by PLC programmable controller and touch display screen, with easy operation interface and working pattern.
5. Both line wire and cross are feeded from coil wire automatically.
Main parameter:
Rated voltage
380V 50Hz 3-phase
Rated capacity
75 KVA
Welding wire diameter
2.0mm-3.0mm
Welding aperture
50*50mm-200*200mm
Width of mesh
1200mm
Number of welding points
25
Production capacity
700 square meter per shift (8hours)
Overall dimension
2.5x2.1x1.4m
Weight
2.0MT
Consist of mesh welding part and mesh cutting part,controlled by PLC and touch screen
pneumatic industrial mesh welding machine
Characteristics:
Pneumatic mesh machine is made up of pneumatic mesh welding machine and pneumatic mesh cutting machine. It adopts computer control to realize precise welding time, balanced current and low failure
1. Main welding machine adopts famous imported pneumatic component to achieve long service life, high precision, great pressure, and tight welding spot.
2. Welding transformer applies new high efficient welding transformer with eight shifting grades that expand welding wire diameter range.
4. Control system is served by PLC programmable controller and touch display screen, with easy operation interface and working pattern.
5. Both line wire and cross are feeded from coil wire automatically.
Main parameter:
Rated voltage
380V 50Hz 3-phase
Rated capacity
75 KVA
Welding wire diameter
2.0mm-3.0mm
Welding aperture
50*50mm-200*200mm
Width of mesh
1200mm
Number of welding points
25
Production capacity
700 square meter per shift (8hours)
Overall dimension
2.5x2.1x1.4m
Weight
2.0MT
pneumatic pipe groover
can making grooving ,chamfering and edge chamfering to V&U type
it utilizes compressed air as energy source and pneumatic motor as driving power
the inner diameter of the pipe is expanded tightly by inner expanding block and the machine can run after self setting of the pipe centre
the groove blade has automatic feed device and feed quantity and the bevel can be chosen freely within the range of 0-45..
it utilizes compressed air as energy source and pneumatic motor as driving power
the inner diameter of the pipe is expanded tightly by inner expanding block and the machine can run after self setting of the pipe centre
the groove blade has automatic feed device and feed quantity and the bevel can be chosen freely within the range of 0-45..
pneumatic spot welder
pneumatic spot welder
welding single spot or multi-dot welding, with wire diameter from 5mm to 10mm.
pneumatic spot welder
Character:
The machine is used in welding single spot or multi-dot welding, with wire diameter from 5mm to 10mm.
Welding material:
carbon steel wire, galvanized wire, stainless steel wire etc.
Usage:
metal product and screw thread, reinforcing steel bar mesh, barbecue grill netting ,arts netting, stinless steel arts etc.
welding single spot or multi-dot welding, with wire diameter from 5mm to 10mm.
pneumatic spot welder
Character:
The machine is used in welding single spot or multi-dot welding, with wire diameter from 5mm to 10mm.
Welding material:
carbon steel wire, galvanized wire, stainless steel wire etc.
Usage:
metal product and screw thread, reinforcing steel bar mesh, barbecue grill netting ,arts netting, stinless steel arts etc.
pneumatic spot welder
pneumatic spot welder
welding single spot or multi-dot welding, with wire diameter from 5mm to 10mm.
pneumatic spot welder
Character:
The machine is used in welding single spot or multi-dot welding, with wire diameter from 5mm to 10mm.
Welding material:
carbon steel wire, galvanized wire, stainless steel wire etc.
Usage:
metal product and screw thread, reinforcing steel bar mesh, barbecue grill netting ,arts netting, stinless steel arts etc.
welding single spot or multi-dot welding, with wire diameter from 5mm to 10mm.
pneumatic spot welder
Character:
The machine is used in welding single spot or multi-dot welding, with wire diameter from 5mm to 10mm.
Welding material:
carbon steel wire, galvanized wire, stainless steel wire etc.
Usage:
metal product and screw thread, reinforcing steel bar mesh, barbecue grill netting ,arts netting, stinless steel arts etc.
pneumatic spot welding machine
pneumatic spot welding machine
Model No: DN-16, 25, 40 ,63 ,80, 100
voltage : 380/220V
pneumatic spot welding machine
Novel structure, special design, good rigidity.Adopt the high definition guidance institution,high staying quality,piston straight pole pressurizing, high speed welding, pressure steady.
Microcomputer control system, twice section discharge, precise control of the welding time and welding current, easy to adjust.
High conduction magnetism silicon , secondary whole structure, output current is high, energy-saving and protect environmental .
Water-transformer,water-, and water-electrode what can improve the use life of equipment.
It ispneumatic spot welding machine .
/ Main technology parameter
Model No.
DN-16
DN-25
Power
16KVA
25KVA
Mains voltage
380V
380V
Duty cycle
20%
20%
Welding thickness
1.5+1.5mm
2.0+2.0mm
Arm body size
Cylinder diameter
Φ80mm
Φ80mm
Stroke of cylinder
60mm
60mm
Electrode head
Φ13mm
Φ13mm
Electrode holding pole
Φ20mm
Φ20mm
Cooling discharge of stream
≥2.5L/min
≥2.5L/min
Weight
Model No: DN-16, 25, 40 ,63 ,80, 100
voltage : 380/220V
pneumatic spot welding machine
Novel structure, special design, good rigidity.Adopt the high definition guidance institution,high staying quality,piston straight pole pressurizing, high speed welding, pressure steady.
Microcomputer control system, twice section discharge, precise control of the welding time and welding current, easy to adjust.
High conduction magnetism silicon , secondary whole structure, output current is high, energy-saving and protect environmental .
Water-transformer,water-, and water-electrode what can improve the use life of equipment.
It ispneumatic spot welding machine .
/ Main technology parameter
Model No.
DN-16
DN-25
Power
16KVA
25KVA
Mains voltage
380V
380V
Duty cycle
20%
20%
Welding thickness
1.5+1.5mm
2.0+2.0mm
Arm body size
Cylinder diameter
Φ80mm
Φ80mm
Stroke of cylinder
60mm
60mm
Electrode head
Φ13mm
Φ13mm
Electrode holding pole
Φ20mm
Φ20mm
Cooling discharge of stream
≥2.5L/min
≥2.5L/min
Weight
Best quality and Reasonable price ppr welding machine
1.fast heating and safe operation
2.CE certification.
3.size:dn20,25,32,40,50,63
4.electronic control.
5.favourable price
Feature:
(1.) welding connector
(2.) Plastic pipe welding machine
(3.) Quality is excellent and professional.we have the ce certification
(4.) Voltage: 220V±10%,frequency:50/60Hz; Power: 800W
(5.) Component: 20-63MM sockets, screws, Screwdriver,hexagonal spanners.Using Manual.standing.
(6.) The size of the moulds:20mm,25mm,32mm,40mm,50mm,63mm
(8.) Pack list: 5pcs/CTN, 15.25/14.75KGS (G.W./N.W.), MEAS/CTN: 44.5X39.5X21CM
(9.) Up to 500pcs, appointed color box and instruction.
Usage:
1. Fixed install heating-side welding head, the welding device placed on the shelves, according to specifications required to install the corresponding heating pipe die head, and pull tight with a hex generally small in the preceding paragraph, a large back-end.
2. Switch on the power (note the power supply must be protected with a ground line), according to the corresponding models of the machine to the instruction attention to light changes, until the welding temperature control device to enter the work state, can be started.
3. With vertical cutting device to cut off pipe tube, pipe and fittings will also promote the welding device with no moving within the die, as required for operation. Immediately after the heating time to reach pipes and fittings removed from the die head at the same time, rapidly rotating non-uniform insert directly to the desired depth, to form a uniform flange joints.
please inquire us for more information...
2.CE certification.
3.size:dn20,25,32,40,50,63
4.electronic control.
5.favourable price
Feature:
(1.) welding connector
(2.) Plastic pipe welding machine
(3.) Quality is excellent and professional.we have the ce certification
(4.) Voltage: 220V±10%,frequency:50/60Hz; Power: 800W
(5.) Component: 20-63MM sockets, screws, Screwdriver,hexagonal spanners.Using Manual.standing.
(6.) The size of the moulds:20mm,25mm,32mm,40mm,50mm,63mm
(8.) Pack list: 5pcs/CTN, 15.25/14.75KGS (G.W./N.W.), MEAS/CTN: 44.5X39.5X21CM
(9.) Up to 500pcs, appointed color box and instruction.
Usage:
1. Fixed install heating-side welding head, the welding device placed on the shelves, according to specifications required to install the corresponding heating pipe die head, and pull tight with a hex generally small in the preceding paragraph, a large back-end.
2. Switch on the power (note the power supply must be protected with a ground line), according to the corresponding models of the machine to the instruction attention to light changes, until the welding temperature control device to enter the work state, can be started.
3. With vertical cutting device to cut off pipe tube, pipe and fittings will also promote the welding device with no moving within the die, as required for operation. Immediately after the heating time to reach pipes and fittings removed from the die head at the same time, rapidly rotating non-uniform insert directly to the desired depth, to form a uniform flange joints.
please inquire us for more information...
pneumatic wire mesh welded machine
pneumatic wire mesh welded machine
welding wire diameter:2.0-3.0mm
welding width:1200mm
welding length:no limited
pneumatic wire mesh welded machine
Characteristics:
Pneumatic mesh machine is made up of pneumatic mesh welding machine and pneumatic mesh cutting machine. It adopts computer control to realize precise welding time, balanced current and low failure
1. Main welding machine adopts famous imported pneumatic component to achieve long service life, high precision, great pressure, and tight welding spot.
2. Welding transformer applies new high efficient welding transformer with eight shifting grades that expand welding wire diameter range.
4. Control system is served by PLC programmable controller and touch display screen, with easy operation interface and working pattern.
5. Both line wire and cross are feeded from coil wire automatically.
Main parameter:
Welded wire diameter: 2.0mm-3.0mm
Welding aperture: 50*50mm-200*200mm
Width of mesh: 1200mm
Number of welding points: 25
Production capacity: 700 square meter per shift (8hours).
Rated voltage: 380V 50Hz 3-phase
Rated electric power: 75 KVA
Overall dimension: 2.5x2.1x1.4m
Weight: 2.0MT
welding wire diameter:2.0-3.0mm
welding width:1200mm
welding length:no limited
pneumatic wire mesh welded machine
Characteristics:
Pneumatic mesh machine is made up of pneumatic mesh welding machine and pneumatic mesh cutting machine. It adopts computer control to realize precise welding time, balanced current and low failure
1. Main welding machine adopts famous imported pneumatic component to achieve long service life, high precision, great pressure, and tight welding spot.
2. Welding transformer applies new high efficient welding transformer with eight shifting grades that expand welding wire diameter range.
4. Control system is served by PLC programmable controller and touch display screen, with easy operation interface and working pattern.
5. Both line wire and cross are feeded from coil wire automatically.
Main parameter:
Welded wire diameter: 2.0mm-3.0mm
Welding aperture: 50*50mm-200*200mm
Width of mesh: 1200mm
Number of welding points: 25
Production capacity: 700 square meter per shift (8hours).
Rated voltage: 380V 50Hz 3-phase
Rated electric power: 75 KVA
Overall dimension: 2.5x2.1x1.4m
Weight: 2.0MT
polyester used,Pneumatic welding machine RJ-19,welding machine, pneumatic strapping tool
polyester used,Pneumatic welding tools RJ-19 is suitable for PET straps with width 13/16/19mm and thickness 0.6~1.5mm.
polyester used, Pneumatic welding tools, pneumatic Welder RJ-19 is suitable for welding PET straps.
Strap width:13/16/19mm
Strap thickness: 0.6~1.5mm.
Weight: 2.2Kg
Size:150*82*175mm
Welding time: 0.5~5s
polyester used, Pneumatic welding tools, pneumatic Welder RJ-19 is suitable for welding PET straps.
Strap width:13/16/19mm
Strap thickness: 0.6~1.5mm.
Weight: 2.2Kg
Size:150*82*175mm
Welding time: 0.5~5s
portable inverter welding machine MMA/ ARC400I
1.Inverter welding machine
2.powerful ability in anti-fluctuation of mains
3.small volume
4.Diameter of rod (mm) 1.6-6
Fine made of imported IGBT module with the most advanced inverter technique; inverter frequency 20kHz, dynamic response is quicker; perfect function, excellent performance, very high reliability; can meet the high quality welding requirement of engineering, is the reliable welding machine of the user.
1.High duty cycle, high welding power allowance, can weld continuously, welding stably even the working cable
to 100m.
2.Has the auto-compensation function to mains voltage fluctuation, powerful ability in anti-fluctuation of
mains, welding current stable and reliable.
3.Has arc dig function, good arc stability, even molten pool, less spatter, satisfactory weld appearance; the
electrode will not be stuck no matter low or high current.
4.Can use cellulose electrode for downward welding, also suitable for various kinds of electrode, especially
use basic electrode for welding low, medium carbon steel, low alloy steel, stainless steel etc.
5.The welder rated current more than 500A can also be used for carbon arc air gouging, means multipurpose.
6.Widely applied for welding petrol pipeline, chemical engineering, car, shipbuilding, boiler, electric
construction, nuclear electric, space flight, military project, engineering installation, bridge building
and field work.
7.ARC-400I model is especially suitable for electric construction industry.
Model
ARC400I
Parameter
Input Voltage (V)
AC380V±15%
Frequency(Hz)
50/60
Rated Input Current(A)
27.6
No-load Voltage (V)
68
Output Current Range (A)
40-400
Rated Output Voltage (V)
36
Arc Force Current Range
0-100
Duty Cycle (%)
60
No-load Loss (W)
100
Efficiency (%)
85
Power Factor
0.93
Insulation Grade
F
Housing Protection Grade
IP21
Net Weight (kg)
38
Dimension (mm)
565×286×432
Product Purchase Guide:
Base Material
Plate Thickness (mm)
Welding rod/carbon Rod Diameter
Current Range (A)
Applicable Model
Carbon Steel,
Stainless Steel,
Low-alloy Steel
3.0-16.0
4.0/5.0
40-400
ARC400I/400D
16.0 above
5.0/6.0
40-500
ARC500D
4.0-15.0
4.0/6.0/8.0
150-500
ARC500D Air Gouging
15.0 above
8.0/10.0
350-630
MZ630I Air Gouging
2.powerful ability in anti-fluctuation of mains
3.small volume
4.Diameter of rod (mm) 1.6-6
Fine made of imported IGBT module with the most advanced inverter technique; inverter frequency 20kHz, dynamic response is quicker; perfect function, excellent performance, very high reliability; can meet the high quality welding requirement of engineering, is the reliable welding machine of the user.
1.High duty cycle, high welding power allowance, can weld continuously, welding stably even the working cable
to 100m.
2.Has the auto-compensation function to mains voltage fluctuation, powerful ability in anti-fluctuation of
mains, welding current stable and reliable.
3.Has arc dig function, good arc stability, even molten pool, less spatter, satisfactory weld appearance; the
electrode will not be stuck no matter low or high current.
4.Can use cellulose electrode for downward welding, also suitable for various kinds of electrode, especially
use basic electrode for welding low, medium carbon steel, low alloy steel, stainless steel etc.
5.The welder rated current more than 500A can also be used for carbon arc air gouging, means multipurpose.
6.Widely applied for welding petrol pipeline, chemical engineering, car, shipbuilding, boiler, electric
construction, nuclear electric, space flight, military project, engineering installation, bridge building
and field work.
7.ARC-400I model is especially suitable for electric construction industry.
Model
ARC400I
Parameter
Input Voltage (V)
AC380V±15%
Frequency(Hz)
50/60
Rated Input Current(A)
27.6
No-load Voltage (V)
68
Output Current Range (A)
40-400
Rated Output Voltage (V)
36
Arc Force Current Range
0-100
Duty Cycle (%)
60
No-load Loss (W)
100
Efficiency (%)
85
Power Factor
0.93
Insulation Grade
F
Housing Protection Grade
IP21
Net Weight (kg)
38
Dimension (mm)
565×286×432
Product Purchase Guide:
Base Material
Plate Thickness (mm)
Welding rod/carbon Rod Diameter
Current Range (A)
Applicable Model
Carbon Steel,
Stainless Steel,
Low-alloy Steel
3.0-16.0
4.0/5.0
40-400
ARC400I/400D
16.0 above
5.0/6.0
40-500
ARC500D
4.0-15.0
4.0/6.0/8.0
150-500
ARC500D Air Gouging
15.0 above
8.0/10.0
350-630
MZ630I Air Gouging
Friday, September 9, 2011
portable 3 in 1 welding device
portable welding device
>weldable pipe diameter: 8-80mm
>weldable wall thickness: 0.5-6.5mm
>wire feeding speed: 0.1-1.5m/min
portable 3 in 1 welding device
Product function and characteristics
-Suitable for various kinds of tube— tube plate assembly method;
-3D frame which is fabricated according to adjust with a fifth dimensional tuning, suitable for pipe diameter very center of smaller intensive heat exchanger welding,
-The welding head can on the surface doing a 180 degree rotated, convenient to replace tungsten pole and wire fine-tuning operation; etc.
-Head of water, electricity, USES the winding way, welding can continuous rotary, cooperate the arc length adjustment, which can realize multilayer welding.
-The weld head adopts water-cooled positioning, avoid pipe head melts in the flow, welder molding beauty,
-Driving and wire used stepping motor system, the nose reliable,
-Adopting PLC control system, command nicety, strong anti-jamming capability
-Friendly human-machine interface adopts LCD touch screen, all Chinese input simple, intuitive operation, convenient,
-By Panasonic IGBT inverter control dc pulse power, high efficiency, arc welding strong stability, weld bead molding beauty,
-Compulsory water-cooling systems, equipped with 16 liters stainless steel water trough, do not suffer site conditions, such as water pressure cooling fully, reliable convenient!
Application
Industries
Petrochemical, boiler, pressure vessel,shipbuilding,atomic energy,aerospace,refrigeration, pharmaceutical,food machinery,etc
Scope
Boiler,pressure vessel,heat exchanger,etc
Products
Pipe diameter 8mm-80mm carbon steel,alloy steel,stainless steel,copper and copper alloy, titanium alloy,etc
Technical parameters
Mains Voltage(3-Phases 50/60Hz)
380V
Rated power input
9KW
Rated input capacity
11.5KVA
Suitable Dia.
8-80mm
Filler Wire Speed
0~1500mm/min
Welding Speed
0.5~5rpm
Frequency
50-60HZ
Rated load sustained rate
60%
Weldable wall thickness
0.5—6.5mm
Tube biggest stretch out length
10mm
Tube biggest indented length
2mm
Welding current adjusting range
4—400A
Pulse frequency
0.5—500HZ
Wire adjustable Angle
<45°
Welding speed
0.1—1.5m/min
Cooling water pressure
1.2kg.f/mm²
Tungsten pole adjustable Angle
<45°
Lateral movement trip
1500mm
Vertical motion stroke
1200mm
Axial movement trip
300mm
Transverse fine-tuning
40mm
Vertical fine-tuning
60mm
Axial fine-tuning
100mm
Note:
1. The above data is only for the customer's reference.
2. The technical parameters can be customized according to the customer's requestment.
3. We reserve the rights to amend the technical specification here without prior notice.
We specialize in the R&D, manufacturing and marketing of welding sets, Closed Tube Welding Machine, Auto SAW machine for saddle pipe joints, Tube -- tube plate Automatic pulse argon arc welding machine,3D adjustment Long Men posture tube–tube/sheet automatic pulse argon arc welding machine, Orbit tube to tube welding machine.
We also have famous Portable Detector for Quenching Medium Performance. The main markets include many countries in Middle East, Africa, Southeast Asia, and Australia.
If you have any question on welding sets, please do not hesitate to contact us
Our advantage:
1. 100% strict test, complies with national standards
2. Unique design, reliable performance, long working life
3. Excellent quality, totally reliable power output
4. Compact in structure
5. low cost of installment and maintenance
6. Advanced PLC control system
7. Easy start, keep emergency
8. Many applied and optional configuration
9. Excellent damping performance
10. Environmentally friendly
>weldable pipe diameter: 8-80mm
>weldable wall thickness: 0.5-6.5mm
>wire feeding speed: 0.1-1.5m/min
portable 3 in 1 welding device
Product function and characteristics
-Suitable for various kinds of tube— tube plate assembly method;
-3D frame which is fabricated according to adjust with a fifth dimensional tuning, suitable for pipe diameter very center of smaller intensive heat exchanger welding,
-The welding head can on the surface doing a 180 degree rotated, convenient to replace tungsten pole and wire fine-tuning operation; etc.
-Head of water, electricity, USES the winding way, welding can continuous rotary, cooperate the arc length adjustment, which can realize multilayer welding.
-The weld head adopts water-cooled positioning, avoid pipe head melts in the flow, welder molding beauty,
-Driving and wire used stepping motor system, the nose reliable,
-Adopting PLC control system, command nicety, strong anti-jamming capability
-Friendly human-machine interface adopts LCD touch screen, all Chinese input simple, intuitive operation, convenient,
-By Panasonic IGBT inverter control dc pulse power, high efficiency, arc welding strong stability, weld bead molding beauty,
-Compulsory water-cooling systems, equipped with 16 liters stainless steel water trough, do not suffer site conditions, such as water pressure cooling fully, reliable convenient!
Application
Industries
Petrochemical, boiler, pressure vessel,shipbuilding,atomic energy,aerospace,refrigeration, pharmaceutical,food machinery,etc
Scope
Boiler,pressure vessel,heat exchanger,etc
Products
Pipe diameter 8mm-80mm carbon steel,alloy steel,stainless steel,copper and copper alloy, titanium alloy,etc
Technical parameters
Mains Voltage(3-Phases 50/60Hz)
380V
Rated power input
9KW
Rated input capacity
11.5KVA
Suitable Dia.
8-80mm
Filler Wire Speed
0~1500mm/min
Welding Speed
0.5~5rpm
Frequency
50-60HZ
Rated load sustained rate
60%
Weldable wall thickness
0.5—6.5mm
Tube biggest stretch out length
10mm
Tube biggest indented length
2mm
Welding current adjusting range
4—400A
Pulse frequency
0.5—500HZ
Wire adjustable Angle
<45°
Welding speed
0.1—1.5m/min
Cooling water pressure
1.2kg.f/mm²
Tungsten pole adjustable Angle
<45°
Lateral movement trip
1500mm
Vertical motion stroke
1200mm
Axial movement trip
300mm
Transverse fine-tuning
40mm
Vertical fine-tuning
60mm
Axial fine-tuning
100mm
Note:
1. The above data is only for the customer's reference.
2. The technical parameters can be customized according to the customer's requestment.
3. We reserve the rights to amend the technical specification here without prior notice.
We specialize in the R&D, manufacturing and marketing of welding sets, Closed Tube Welding Machine, Auto SAW machine for saddle pipe joints, Tube -- tube plate Automatic pulse argon arc welding machine,3D adjustment Long Men posture tube–tube/sheet automatic pulse argon arc welding machine, Orbit tube to tube welding machine.
We also have famous Portable Detector for Quenching Medium Performance. The main markets include many countries in Middle East, Africa, Southeast Asia, and Australia.
If you have any question on welding sets, please do not hesitate to contact us
Our advantage:
1. 100% strict test, complies with national standards
2. Unique design, reliable performance, long working life
3. Excellent quality, totally reliable power output
4. Compact in structure
5. low cost of installment and maintenance
6. Advanced PLC control system
7. Easy start, keep emergency
8. Many applied and optional configuration
9. Excellent damping performance
10. Environmentally friendly
portable ARC inverter welding machine
1 CE inverter welding machine,arc welding machine
2 Suitable electrode for 1.6-3.2mm
3 Ajust current 30-200A
4 Portable lift
Portable ARC Inverter Welding Machine
1. Simply circuit design, reduced size and weight, highly effective and
energy saving;
2. Strong electricity compensation capabiliby, voltage pulsation resistance, ajustable
welding current;
3. Small DC with proportional thrust control technology, single
switch, simpler welding operation;
4. No load energy consumption <100W,
energy saving up to 50%;
5. 100KHZ inverter frequency 100KHz, easy to arc initiation, resistant to
interference, stable arc, low welding
noise,
little welding spatter, deep melting pool, high welding
strength;
6. Applicable for various acid
and basic electrodes welding, cellulose electrodes downhand welding is
available;
7. Applicable for all kinds of ferrous metals such as low carbon steel, medium carbon
steel, stainless steel etc;
Welding Machine Detail Information
Model
CAN(MMA)-160
CAN(MMA)-180
CAN(MMA)-200
CAN(MMA)-250
Power Voltage
AC220V ±15%
AC220V ±15%
AC220V ±15%
AC220V ±15%
Frequency(HZ)
50/60
50/60
50/60
50/60
Rated Input Current(A)
24
28
32
35
No-load Voltage(V)
60
60
68
68
Output Current(A)
30-160
30-180
30-200
40-250
Rated Output Voltage(V)
25.6
27
28
30
Duty Cycle(%)
60
60
60
60
No-load Loss(W)
40
40
40
40
Efficiency(%)
85
85
85
85
Power Factor
0.93
0.93
0.93
0.93
Insulation Class
B
B
B
B
Protection Class
IP21
IP21
IP21
IP21
Weight(kg)
8
8
9
9.5
Diameter of rod(mm)
1.6-3.2
1.6-3.2
1.6-4
1.6-4
Overall Dimension(mm)
475×265×340
475×265×340
475×265×340
475×265×340
2 Suitable electrode for 1.6-3.2mm
3 Ajust current 30-200A
4 Portable lift
Portable ARC Inverter Welding Machine
1. Simply circuit design, reduced size and weight, highly effective and
energy saving;
2. Strong electricity compensation capabiliby, voltage pulsation resistance, ajustable
welding current;
3. Small DC with proportional thrust control technology, single
switch, simpler welding operation;
4. No load energy consumption <100W,
energy saving up to 50%;
5. 100KHZ inverter frequency 100KHz, easy to arc initiation, resistant to
interference, stable arc, low welding
noise,
little welding spatter, deep melting pool, high welding
strength;
6. Applicable for various acid
and basic electrodes welding, cellulose electrodes downhand welding is
available;
7. Applicable for all kinds of ferrous metals such as low carbon steel, medium carbon
steel, stainless steel etc;
Welding Machine Detail Information
Model
CAN(MMA)-160
CAN(MMA)-180
CAN(MMA)-200
CAN(MMA)-250
Power Voltage
AC220V ±15%
AC220V ±15%
AC220V ±15%
AC220V ±15%
Frequency(HZ)
50/60
50/60
50/60
50/60
Rated Input Current(A)
24
28
32
35
No-load Voltage(V)
60
60
68
68
Output Current(A)
30-160
30-180
30-200
40-250
Rated Output Voltage(V)
25.6
27
28
30
Duty Cycle(%)
60
60
60
60
No-load Loss(W)
40
40
40
40
Efficiency(%)
85
85
85
85
Power Factor
0.93
0.93
0.93
0.93
Insulation Class
B
B
B
B
Protection Class
IP21
IP21
IP21
IP21
Weight(kg)
8
8
9
9.5
Diameter of rod(mm)
1.6-3.2
1.6-3.2
1.6-4
1.6-4
Overall Dimension(mm)
475×265×340
475×265×340
475×265×340
475×265×340
portable mini inverter arc elbow welding machine mma400
portable mini inverter arc elbow welding machine mma400
1Adopting IGBT inverter technology.
2Easy arc ignition, little spatter
portable mini inverter arc elbow welding machine mma400
Huizhou Mainstay Electronic co., Ltd which is located in the beautiful Huizhou city of Guangdong province is a research & industry & trade integrated hi-tech enterprise, specializing in manufacturing electric welding machine. The company lays down a foundation for technology and production equipment, gathering a group of excellent research engineers and processing a young and energetic team. At present, the company has a product range of more than 10 series and over 30 models.
Model:MMA120/158/168/160/200/250/300/320 IGBT/400 IGBT/500 IGBT
Features:
1.Limitless adjustment, easy to operate, easy to carry, economical, durable and reliable.
2.Stable electric arc, easy-controlled molten bath, artistic welded joint forming, automatic protection on overvoltage and overcurrent.
3.Continuous working, stable performance, has the function of automatic compensation on voltage undulate.
4.No-load loss is less than 10W, saves 50% energy compares to traditional welding machine.
5.Be suitable to stainless steel product, decoration, hardware and so on to make the thin plate welding.
Main Technical specifications
MODEL/ITEM
MMA-400
Rated input voltage(V)
AC380V±15%,3ph 50/60Hz
Rated Input Power(KVA)
18.3
Rated output
400A/36V
Range of welding current regulation(A)
40-250A
No-load voltage(V)
67
Duty cycle
60%
Efficiency(%)
85
Power factor
0.85
Outer covering protection rank
IP23
Insulation grade
F
Outlook size(mm)
565×286×500
Weight(KG)
28
Thrust adjustment range(mm)
0-100
Rod diameter(mm)
1.6-6.0
Standard Configuration
2pcs of KDP95 fast plug
Options
Electrode holder,Welding cable,Earth clamp,Protective mask
PLS NOTE:
The average of our welding machine lasts between seven and eight years.
If there were problems in seven days,we replace the new one for you.
Return policy:
We provide a free 60 DAY WARRANTY for this item.
Should returns be required:
Step1)Contact us via Alibaba.com's message center
Step2)Provide as much as detail possible about the problem you are having
Step3)Authorization to return the item will be issued
Step4)Return the item for the agreed exchange or refund
*All return shipping costs are the responsibility of the buyer.
1Adopting IGBT inverter technology.
2Easy arc ignition, little spatter
portable mini inverter arc elbow welding machine mma400
Huizhou Mainstay Electronic co., Ltd which is located in the beautiful Huizhou city of Guangdong province is a research & industry & trade integrated hi-tech enterprise, specializing in manufacturing electric welding machine. The company lays down a foundation for technology and production equipment, gathering a group of excellent research engineers and processing a young and energetic team. At present, the company has a product range of more than 10 series and over 30 models.
Model:MMA120/158/168/160/200/250/300/320 IGBT/400 IGBT/500 IGBT
Features:
1.Limitless adjustment, easy to operate, easy to carry, economical, durable and reliable.
2.Stable electric arc, easy-controlled molten bath, artistic welded joint forming, automatic protection on overvoltage and overcurrent.
3.Continuous working, stable performance, has the function of automatic compensation on voltage undulate.
4.No-load loss is less than 10W, saves 50% energy compares to traditional welding machine.
5.Be suitable to stainless steel product, decoration, hardware and so on to make the thin plate welding.
Main Technical specifications
MODEL/ITEM
MMA-400
Rated input voltage(V)
AC380V±15%,3ph 50/60Hz
Rated Input Power(KVA)
18.3
Rated output
400A/36V
Range of welding current regulation(A)
40-250A
No-load voltage(V)
67
Duty cycle
60%
Efficiency(%)
85
Power factor
0.85
Outer covering protection rank
IP23
Insulation grade
F
Outlook size(mm)
565×286×500
Weight(KG)
28
Thrust adjustment range(mm)
0-100
Rod diameter(mm)
1.6-6.0
Standard Configuration
2pcs of KDP95 fast plug
Options
Electrode holder,Welding cable,Earth clamp,Protective mask
PLS NOTE:
The average of our welding machine lasts between seven and eight years.
If there were problems in seven days,we replace the new one for you.
Return policy:
We provide a free 60 DAY WARRANTY for this item.
Should returns be required:
Step1)Contact us via Alibaba.com's message center
Step2)Provide as much as detail possible about the problem you are having
Step3)Authorization to return the item will be issued
Step4)Return the item for the agreed exchange or refund
*All return shipping costs are the responsibility of the buyer.
portable mma welder inverter ZX7-200
portable mma welder inverter ZX7-200
1.compact ,portable,highly effective
2.OEM accepted
3.certificate:ISO9001
mma welder
portable mma welder inverter ZX7-200T,
welder inverter,mma welder ,welder
Technical parameter
zx7-200T
Rated voltage(V)
230
Input capacity(KW)
7.1
Frequency(HZ)
50/60
No-load VOLTAGE(v)
78
Current ampere
10-160
Rated duty cycle(%)
60%
Efficiency(%)
80
Class of insulation
H
Applied welding Rod(mm)
1.6-5.0
Fuse(A)
30
Case protection Degree
IP21
Arc-starting (COS)
0.93
Weight(KG)
6.8
External dimension(cm)
43*21.4*30.5
1.It has small volume,light weight,high efficiency and can save energy
2.Compact,portable and resisting interferation thrust,well of adjusting function.
3.The electrical arc is stable and splash is small.
4.The mini inverter welder welding quality is quite good,deep molten pool and high intensity.
5.When crossing current and voltage can take self-protection.
6.It may work consequently,for it has stable capacity and function which can automatically
compensate voltage fluctuation.
7.It is suitable for welding electrode of all sorts of ferrous metals such as low carton steel,
medium carton ste.
8.We have successfully exported
welding machine
to Viet Nam ,Singapore, UAE, Arab ,
Brazil and so on.
portable mma welder inverter ZX7-200
is the main product of our company
.
portable mma welder inverter ZX7-200portable mma welder inverter ZX7-200
1.compact ,portable,highly effective
2.OEM accepted
3.certificate:ISO9001
mma welder
portable mma welder inverter ZX7-200T,
welder inverter,mma welder ,welder
Technical parameter
zx7-200T
Rated voltage(V)
230
Input capacity(KW)
7.1
Frequency(HZ)
50/60
No-load VOLTAGE(v)
78
Current ampere
10-160
Rated duty cycle(%)
60%
Efficiency(%)
80
Class of insulation
H
Applied welding Rod(mm)
1.6-5.0
Fuse(A)
30
Case protection Degree
IP21
Arc-starting (COS)
0.93
Weight(KG)
6.8
External dimension(cm)
43*21.4*30.5
1.It has small volume,light weight,high efficiency and can save energy
2.Compact,portable and resisting interferation thrust,well of adjusting function.
3.The electrical arc is stable and splash is small.
4.The mini inverter welder welding quality is quite good,deep molten pool and high intensity.
5.When crossing current and voltage can take self-protection.
6.It may work consequently,for it has stable capacity and function which can automatically
compensate voltage fluctuation.
7.It is suitable for welding electrode of all sorts of ferrous metals such as low carton steel,
medium carton ste.
8.We have successfully exported
welding machine
to Viet Nam ,Singapore, UAE, Arab ,
Brazil and so on.
portable mma welder inverter ZX7-200
is the main product of our company
.
portable mma welder inverter ZX7-200portable mma welder inverter ZX7-200
portable spot welding machine
Multiple functions
Excellent coherence and stability
High reliability
High accuracy of control
Good applicability
Multiple functions digital inverting welding machine
The leading digital Inverting welding machine in China
Obtain patent, patent number:
ZL 2008 2 0076183.5(Double-pulsed GMAW)
ZL 2008 1 0054660.2(Multiple functions digital Inverting welding machine)
ZL 2009 3 0125321.4(Control panel for electric welder)
Certificate: CE, CCC, EMC, ISO9001:2000
Color: Available
Brand: Nebula
Packing: Carton package, plastic bag, foam
Usage: low-carbon steel, aluminum and its alloy, stainless steel, Copper, and etc
Application Fields: Exhaust pipe, Steel bedstead, laser printer body frame, chair foot, heavy vehicle, Forklift fuel tank, public bus carcass, rail locomotive, Stainless steel carcass, storage rack, golf club head, Cyclostyle carcass, machineshop truck car hopper, Electron production facility, conveyer belt component, Office billboard, Office clamp, aluminum alloy window frame, automobile parts, aluminum alloy control cabinet, Car roof, clutch, autolift, fuel tank, bogie, aluminum patio furniture, Stainless kitchen, baking equipment and etc
Nebula series multiple functions digital Inverting welding machine has many advantages as following:
1. Multiple functions:
Nebula series of eight-function digital welding machine contain 8 single welding methods: MMA, DC-argon arc welding, pulsed-argon arc welding, argon arc spot welding, GMAW(CO2/MIG/MAG), pulsed-GMAW, double-pulsed GMAW, arc carbon gas cutting welder and contain welding method consisted of any functions in above 8, that is different welding functions are embodied in the same one welding machine.
The clients can invert the welding function according to own request in the same one welding machine, which saves much money.
The nebula series of eight-functions welding machine has many menus: date and time display, welding machine temperature(the main power parts), instructions, welding record, memory and recall of parameters, remote control and network application etc, that provide much more convenience for users
2. Excellent coherence and stability:
Compared with the traditional simulating-control circuit welding machine, the digital welding machine is insensitive to the change of temperature, humidity or time, its performance is more stable, as well as better trouble-resistant capacity and coherence.
3. High reliability:
The function of digital welding machine is controlled by software, so changing software can add more functions to the welding machine and the activity do not influence the primary function and capacity. As well, the digital welding machine has the protective function of under-voltage and over-voltage and over-heat.
4. High accuracy of control:
The simulating control is difficult to get the accurate control, whereas the accuracy of digitized control is only related to the quantification lapse and the limited word length of the system, so the digitized control can obtain the high accuracy.
5. Good applicability:
The series of Nebula welding machines do not have high demand for the quality of input power, the machines can be operable under the input voltage between 260V and 460V, and they suit to different outdoor working place.
6. Authoritative welding expert database:
The nebula has stored the expert databases. Users can weld by using the expert databases which are as prominent as the international welding expert.
7. Long-distance software upgrade:
Nebula carries out the long-distance upgrade through internet. The user can add other welding functions to welding machine, and improve the welding performance by software upgrade.
8. Long-distance diagnosis function:
Nebula can realize the long-distance diagnosis through internet. When the user’s welding machine does not work, the nebula company will find the fault in time and repair the user’s welding machine.
9. Long-distance control function:
Nebula can carry out the long-distance control through internet as well as the local automatic control.
10. Long-distance monitoring function:
Nebula can carry out the long-distance monitoring function through internet, and user in any part of the world can see their machines actual wave of electric current and voltage and all parameters.
11. Handy performance:
Taking the requirements of different users into consideration, the series of nebula products furnish many ways of operating welding torch, the user’s self-definition, and various striking arc ways.
12. LCD and digital display:
With the two kinds of demonstrations: LCD and digital, the parameter set will be shown apparently in LCD display in English or in Chinese, so the menu operation is very convenient, fast and intuitive.
13. Energy-saving and small volume:
Our machine adopts the improved IGBT inverting technology which has diminished the entire power source volume and weight, greatly reduced the loss of copper and iron, and thus increased the power source, efficiency and the power factor. It has the function of checking interior temperature of welding machine. So its energy-saving achievement is remarkable.
14. Good ventilation system:
The nebula welding machine adopts first grade metallic directional blower. Its high temperature-resistant ability is very well and also has the ability to control temperature, save power and diminish noise.
15. Multi-language menu:
There are different language on the display, such as Chinese, English, Spanish, Polish and etc, which is much easy and useful for client’s usage.
Excellent coherence and stability
High reliability
High accuracy of control
Good applicability
Multiple functions digital inverting welding machine
The leading digital Inverting welding machine in China
Obtain patent, patent number:
ZL 2008 2 0076183.5(Double-pulsed GMAW)
ZL 2008 1 0054660.2(Multiple functions digital Inverting welding machine)
ZL 2009 3 0125321.4(Control panel for electric welder)
Certificate: CE, CCC, EMC, ISO9001:2000
Color: Available
Brand: Nebula
Packing: Carton package, plastic bag, foam
Usage: low-carbon steel, aluminum and its alloy, stainless steel, Copper, and etc
Application Fields: Exhaust pipe, Steel bedstead, laser printer body frame, chair foot, heavy vehicle, Forklift fuel tank, public bus carcass, rail locomotive, Stainless steel carcass, storage rack, golf club head, Cyclostyle carcass, machineshop truck car hopper, Electron production facility, conveyer belt component, Office billboard, Office clamp, aluminum alloy window frame, automobile parts, aluminum alloy control cabinet, Car roof, clutch, autolift, fuel tank, bogie, aluminum patio furniture, Stainless kitchen, baking equipment and etc
Nebula series multiple functions digital Inverting welding machine has many advantages as following:
1. Multiple functions:
Nebula series of eight-function digital welding machine contain 8 single welding methods: MMA, DC-argon arc welding, pulsed-argon arc welding, argon arc spot welding, GMAW(CO2/MIG/MAG), pulsed-GMAW, double-pulsed GMAW, arc carbon gas cutting welder and contain welding method consisted of any functions in above 8, that is different welding functions are embodied in the same one welding machine.
The clients can invert the welding function according to own request in the same one welding machine, which saves much money.
The nebula series of eight-functions welding machine has many menus: date and time display, welding machine temperature(the main power parts), instructions, welding record, memory and recall of parameters, remote control and network application etc, that provide much more convenience for users
2. Excellent coherence and stability:
Compared with the traditional simulating-control circuit welding machine, the digital welding machine is insensitive to the change of temperature, humidity or time, its performance is more stable, as well as better trouble-resistant capacity and coherence.
3. High reliability:
The function of digital welding machine is controlled by software, so changing software can add more functions to the welding machine and the activity do not influence the primary function and capacity. As well, the digital welding machine has the protective function of under-voltage and over-voltage and over-heat.
4. High accuracy of control:
The simulating control is difficult to get the accurate control, whereas the accuracy of digitized control is only related to the quantification lapse and the limited word length of the system, so the digitized control can obtain the high accuracy.
5. Good applicability:
The series of Nebula welding machines do not have high demand for the quality of input power, the machines can be operable under the input voltage between 260V and 460V, and they suit to different outdoor working place.
6. Authoritative welding expert database:
The nebula has stored the expert databases. Users can weld by using the expert databases which are as prominent as the international welding expert.
7. Long-distance software upgrade:
Nebula carries out the long-distance upgrade through internet. The user can add other welding functions to welding machine, and improve the welding performance by software upgrade.
8. Long-distance diagnosis function:
Nebula can realize the long-distance diagnosis through internet. When the user’s welding machine does not work, the nebula company will find the fault in time and repair the user’s welding machine.
9. Long-distance control function:
Nebula can carry out the long-distance control through internet as well as the local automatic control.
10. Long-distance monitoring function:
Nebula can carry out the long-distance monitoring function through internet, and user in any part of the world can see their machines actual wave of electric current and voltage and all parameters.
11. Handy performance:
Taking the requirements of different users into consideration, the series of nebula products furnish many ways of operating welding torch, the user’s self-definition, and various striking arc ways.
12. LCD and digital display:
With the two kinds of demonstrations: LCD and digital, the parameter set will be shown apparently in LCD display in English or in Chinese, so the menu operation is very convenient, fast and intuitive.
13. Energy-saving and small volume:
Our machine adopts the improved IGBT inverting technology which has diminished the entire power source volume and weight, greatly reduced the loss of copper and iron, and thus increased the power source, efficiency and the power factor. It has the function of checking interior temperature of welding machine. So its energy-saving achievement is remarkable.
14. Good ventilation system:
The nebula welding machine adopts first grade metallic directional blower. Its high temperature-resistant ability is very well and also has the ability to control temperature, save power and diminish noise.
15. Multi-language menu:
There are different language on the display, such as Chinese, English, Spanish, Polish and etc, which is much easy and useful for client’s usage.
portable ultrasonic plastic spot welding machine
Ultrasonic spot welding machine
Japan NTK vibrator,
handset transducer,whole-set imported components,durable
Ultrasonic plastic spot welding machine
Applied to:
Fix the rhinestone on clothes,shoes,trinkets,the spot welding for plastic part,screw implanting,rivet joint
Features:
1)Original Japan NTK vibrator, stable output
2)Handset transducer, easy to operate
3)Excellent circuit imported from Japan, easy and convenient to operate.
4)Especially suitable for 1-15mm welding.
5)Whole-set excellent elements assembly, good quality and durable Welding machine.
Japan NTK vibrator,
handset transducer,whole-set imported components,durable
Ultrasonic plastic spot welding machine
Applied to:
Fix the rhinestone on clothes,shoes,trinkets,the spot welding for plastic part,screw implanting,rivet joint
Features:
1)Original Japan NTK vibrator, stable output
2)Handset transducer, easy to operate
3)Excellent circuit imported from Japan, easy and convenient to operate.
4)Especially suitable for 1-15mm welding.
5)Whole-set excellent elements assembly, good quality and durable Welding machine.
portable ultrasonic spot welding machine, Spot Plastic Welder
Ultrasonic Spot welder
Portable Ultrasonic spot welding
Plastic Spot Welder
Portable Welder
CE Spot Welder
portable ultrasonic welding machine
Mainly application
Spot welding, riveting, screw imbedding, appliqué welding, often used in the field of stationery industries, consume electronics industry and electronics industry
Introduction of Ultrasonic handhold welder
ultrasonic welding machine is applied for plastic welding process, like, ultrasonic ABS welding, ultrasonic Acrylic welding, ultrasonic PVC and ABS welding, ultrasonic PA welding, ultrasonic PC welding, ultrasonic PE welding, ultrasonic pp welding, ultrasonic PE welding, ultrasonic PP welding, ultrasonic PS welding, ultrasonic PVC welding.
Characteristics
Proprietary anti-corrosion technology, even in the harsh acid salt (such as electroplating factory) working environment, the service life of up to ten years.
With imported high-power device driver, the output power of the strong.
It is the latest line of forward control; ultrasonic wave density can increase by more detailed cleaning, cleanliness higher.
Years of continuous improvement, thoroughly tempered, quality, rock-solid
Advantages
1:low power consumption, firm welding, low noise, small-sized, dust-proof, high performance 2:automatic frequency-tuned system: take PLL for the ultrasonic circuit control 3: with pedal switch to convenient control 4: compacted, space-saved, convenient to transport
parameter
Model
KLC-3028/KLC-5028/KLC-8028
Power
300w,500w,800w made-to-order
Voltage
220V/50Hz 110V/60Hz
Output Frequency
28kHz/35kHz/40kHz
Cohesion Specification
1-15mm
Cooling mode
Fan cooling
Working mode
Separated excited
Volume
268*168*198mm(L*W*H)
Net weight
7.5KG
Gross weight
10kgs
The manufacturer will do endless improvement,please contact us for updated
Portable Ultrasonic spot welding
Plastic Spot Welder
Portable Welder
CE Spot Welder
portable ultrasonic welding machine
Mainly application
Spot welding, riveting, screw imbedding, appliqué welding, often used in the field of stationery industries, consume electronics industry and electronics industry
Introduction of Ultrasonic handhold welder
ultrasonic welding machine is applied for plastic welding process, like, ultrasonic ABS welding, ultrasonic Acrylic welding, ultrasonic PVC and ABS welding, ultrasonic PA welding, ultrasonic PC welding, ultrasonic PE welding, ultrasonic pp welding, ultrasonic PE welding, ultrasonic PP welding, ultrasonic PS welding, ultrasonic PVC welding.
Characteristics
Proprietary anti-corrosion technology, even in the harsh acid salt (such as electroplating factory) working environment, the service life of up to ten years.
With imported high-power device driver, the output power of the strong.
It is the latest line of forward control; ultrasonic wave density can increase by more detailed cleaning, cleanliness higher.
Years of continuous improvement, thoroughly tempered, quality, rock-solid
Advantages
1:low power consumption, firm welding, low noise, small-sized, dust-proof, high performance 2:automatic frequency-tuned system: take PLL for the ultrasonic circuit control 3: with pedal switch to convenient control 4: compacted, space-saved, convenient to transport
parameter
Model
KLC-3028/KLC-5028/KLC-8028
Power
300w,500w,800w made-to-order
Voltage
220V/50Hz 110V/60Hz
Output Frequency
28kHz/35kHz/40kHz
Cohesion Specification
1-15mm
Cooling mode
Fan cooling
Working mode
Separated excited
Volume
268*168*198mm(L*W*H)
Net weight
7.5KG
Gross weight
10kgs
The manufacturer will do endless improvement,please contact us for updated
Best quality and Reasonble price ppr welding machine,pb.pe,pvc welding machine.
1.fast heating and safe operation
2.CE certification.
3.size:dn20,25,32,40,50,63
4.electronic control.
5.favourable price
Feature:
(1.) welding connector
(2.) Plastic pipe welding machine
(3.) Quality is excellent and professional.we have the ce certification
(4.) Voltage: 220V±10%,frequency:50/60Hz; Power: 800W
(5.) Pack list: 5pcs/CTN, 15.25/14.75KGS (G.W./N.W.).
(6.) Up to 500pcs, appointed color box and instruction.
Usage:
1. Fixed install heating-side welding head, the welding device placed on the shelves, according to specifications required to install the corresponding heating pipe die head, and pull tight with a hex generally small in the preceding paragraph, a large back-end.
2. Switch on the power (note the power supply must be protected with a ground line), according to the corresponding models of the machine to the instruction attention to light changes, until the welding temperature control device to enter the work state, can be started.
3. With vertical cutting device to cut off pipe tube, pipe and fittings will also promote the welding device with no moving within the die, as required for operation. Immediately after the heating time to reach pipes and fittings removed from the die head at the same time, rapidly rotating non-uniform insert directly to the desired depth, to form a uniform flange joints.
please inquire us for more information...
2.CE certification.
3.size:dn20,25,32,40,50,63
4.electronic control.
5.favourable price
Feature:
(1.) welding connector
(2.) Plastic pipe welding machine
(3.) Quality is excellent and professional.we have the ce certification
(4.) Voltage: 220V±10%,frequency:50/60Hz; Power: 800W
(5.) Pack list: 5pcs/CTN, 15.25/14.75KGS (G.W./N.W.).
(6.) Up to 500pcs, appointed color box and instruction.
Usage:
1. Fixed install heating-side welding head, the welding device placed on the shelves, according to specifications required to install the corresponding heating pipe die head, and pull tight with a hex generally small in the preceding paragraph, a large back-end.
2. Switch on the power (note the power supply must be protected with a ground line), according to the corresponding models of the machine to the instruction attention to light changes, until the welding temperature control device to enter the work state, can be started.
3. With vertical cutting device to cut off pipe tube, pipe and fittings will also promote the welding device with no moving within the die, as required for operation. Immediately after the heating time to reach pipes and fittings removed from the die head at the same time, rapidly rotating non-uniform insert directly to the desired depth, to form a uniform flange joints.
please inquire us for more information...
portable welder machine
For welding plastic flex sheet made of PVC, PE, linoleum and modified thermoplastics. Light weight and portable design.
For welding plastic flex sheet made of PVC, PE, linoleum and modified thermoplastics. With potentiometer for welding speed and air temperature. Light weight and portable design. Easy use and maintenance.
Small, light and compact
Integrated wall switch
Adjustable airflow
Electronically controlled heating and drive
UNIFLOOR S 100-230 V
Attribute
Unit
Value
Voltage
V
100-230
Power consumption
W
2300
Frequency
Hz
50/60
Noise emission level LpA
dB
67
Size (L x W x H)
mm
420 x 270 x 215
Weight
kg
14.0
hot air seaming machine
hot air seam machine
hot air welding tool
hot air welding machine
hot air welder
pvc hot air welder
pvc hot air welding
pvc hot air welding machine
pvc hot air seaming machine
pvc hot air seam machine
tarpaulin seam machine
seaming tool
seaming machine
plastic seaming machine
seaming machine for cans
pvc seaming machine
seaming machine parts
seaming machine pvc
seaming machine roller
seaming carpet
seaming accessory
floor seaming machine
seaming roll
seaming tools
welded machine
welder machine
welder
welding machine
welder machine
hot air welder machine
hot wave welder machine
portable welder machine
leister welder machine
welder machine plastic
pvc welder machine
plastic welder machine
tarpaulin welder machine
welding tools
welding equipment
hot wind welder
hot wind welding machine
hot wind seaming machine
hot wind seam machine
welding machine
welder machine
hot air welder machine
hot wave welder machine
portable welder machine
leister welder machine
welder machine plastic
pvc welder machine
plastic welder machine
tarpaulin welder machine
welding tools
welding equipment
hot wind welder
hot wind welding machine
hot wind seaming machine
hot wind seam machine
hot air seam sealing machine
seam sealing machine
hot air sealing machine
flat seam machine
hot air welding machine
seam roller machine
filter seaming machine
Update Date:2011-9-28 5:51:29
For welding plastic flex sheet made of PVC, PE, linoleum and modified thermoplastics. With potentiometer for welding speed and air temperature. Light weight and portable design. Easy use and maintenance.
Small, light and compact
Integrated wall switch
Adjustable airflow
Electronically controlled heating and drive
UNIFLOOR S 100-230 V
Attribute
Unit
Value
Voltage
V
100-230
Power consumption
W
2300
Frequency
Hz
50/60
Noise emission level LpA
dB
67
Size (L x W x H)
mm
420 x 270 x 215
Weight
kg
14.0
hot air seaming machine
hot air seam machine
hot air welding tool
hot air welding machine
hot air welder
pvc hot air welder
pvc hot air welding
pvc hot air welding machine
pvc hot air seaming machine
pvc hot air seam machine
tarpaulin seam machine
seaming tool
seaming machine
plastic seaming machine
seaming machine for cans
pvc seaming machine
seaming machine parts
seaming machine pvc
seaming machine roller
seaming carpet
seaming accessory
floor seaming machine
seaming roll
seaming tools
welded machine
welder machine
welder
welding machine
welder machine
hot air welder machine
hot wave welder machine
portable welder machine
leister welder machine
welder machine plastic
pvc welder machine
plastic welder machine
tarpaulin welder machine
welding tools
welding equipment
hot wind welder
hot wind welding machine
hot wind seaming machine
hot wind seam machine
welding machine
welder machine
hot air welder machine
hot wave welder machine
portable welder machine
leister welder machine
welder machine plastic
pvc welder machine
plastic welder machine
tarpaulin welder machine
welding tools
welding equipment
hot wind welder
hot wind welding machine
hot wind seaming machine
hot wind seam machine
hot air seam sealing machine
seam sealing machine
hot air sealing machine
flat seam machine
hot air welding machine
seam roller machine
filter seaming machine
Update Date:2011-9-28 5:51:29
portable welding machine
industrial welders, EDON welders, DC MMA welder,MIG/MAG/CO2 welders, protable MMA welders, AC Arc welders, and so on.
our compamy can supply all kinds of weling machine, such as industrial welders, EDON welders, DC MMA welders, MIG/MAG/CO2 welders, protable MMA welders, AC Arc welders, automatic welding machines and so on.
They all have different size and different weight.
We hope to cooperate with all customers allover the world.
our compamy can supply all kinds of weling machine, such as industrial welders, EDON welders, DC MMA welders, MIG/MAG/CO2 welders, protable MMA welders, AC Arc welders, automatic welding machines and so on.
They all have different size and different weight.
We hope to cooperate with all customers allover the world.
portable welding machine
For welding plastic flex sheet made of PVC, PE, linoleum and modified thermoplastics. Light weight and portable design.
For welding plastic flex sheet made of PVC, PE, linoleum and modified thermoplastics. With potentiometer for welding speed and air temperature. Light weight and portable design. Easy use and maintenance.
Small, light and compact
Integrated wall switch
Adjustable airflow
Electronically controlled heating and drive
UNIFLOOR S 100-230 V
Attribute
Unit
Value
Voltage
V
100-230
Power consumption
W
2300
Frequency
Hz
50/60
Noise emission level LpA
dB
67
Size (L x W x H)
mm
420 x 270 x 215
Weight
kg
14.0
hot air seaming machine
hot air seam machine
hot air welding tool
hot air welding machine
hot air welder
pvc hot air welder
pvc hot air welding
pvc hot air welding machine
pvc hot air seaming machine
pvc hot air seam machine
tarpaulin seam machine
seaming tool
seaming machine
plastic seaming machine
seaming machine for cans
pvc seaming machine
seaming machine parts
seaming machine pvc
seaming machine roller
seaming carpet
seaming accessory
floor seaming machine
seaming roll
seaming tools
welded machine
welder machine
welder
welding machine
welder machine
hot air welder machine
hot wave welder machine
portable welder machine
leister welder machine
welder machine plastic
pvc welder machine
plastic welder machine
tarpaulin welder machine
welding tools
welding equipment
hot wind welder
hot wind welding machine
hot wind seaming machine
hot wind seam machine
welding machine
welder machine
hot air welder machine
hot wave welder machine
portable welder machine
leister welder machine
welder machine plastic
pvc welder machine
plastic welder machine
tarpaulin welder machine
welding tools
welding equipment
hot wind welder
hot wind welding machine
hot wind seaming machine
hot wind seam machine
hot air seam sealing machine
seam sealing machine
hot air sealing machine
flat seam machine
hot air welding machine
seam roller machine
filter seaming machine
Update Date:2011-9-28 5:51:23
For welding plastic flex sheet made of PVC, PE, linoleum and modified thermoplastics. With potentiometer for welding speed and air temperature. Light weight and portable design. Easy use and maintenance.
Small, light and compact
Integrated wall switch
Adjustable airflow
Electronically controlled heating and drive
UNIFLOOR S 100-230 V
Attribute
Unit
Value
Voltage
V
100-230
Power consumption
W
2300
Frequency
Hz
50/60
Noise emission level LpA
dB
67
Size (L x W x H)
mm
420 x 270 x 215
Weight
kg
14.0
hot air seaming machine
hot air seam machine
hot air welding tool
hot air welding machine
hot air welder
pvc hot air welder
pvc hot air welding
pvc hot air welding machine
pvc hot air seaming machine
pvc hot air seam machine
tarpaulin seam machine
seaming tool
seaming machine
plastic seaming machine
seaming machine for cans
pvc seaming machine
seaming machine parts
seaming machine pvc
seaming machine roller
seaming carpet
seaming accessory
floor seaming machine
seaming roll
seaming tools
welded machine
welder machine
welder
welding machine
welder machine
hot air welder machine
hot wave welder machine
portable welder machine
leister welder machine
welder machine plastic
pvc welder machine
plastic welder machine
tarpaulin welder machine
welding tools
welding equipment
hot wind welder
hot wind welding machine
hot wind seaming machine
hot wind seam machine
welding machine
welder machine
hot air welder machine
hot wave welder machine
portable welder machine
leister welder machine
welder machine plastic
pvc welder machine
plastic welder machine
tarpaulin welder machine
welding tools
welding equipment
hot wind welder
hot wind welding machine
hot wind seaming machine
hot wind seam machine
hot air seam sealing machine
seam sealing machine
hot air sealing machine
flat seam machine
hot air welding machine
seam roller machine
filter seaming machine
Update Date:2011-9-28 5:51:23
portable welding set machine ZX7-200
portable welding set machine ZX7-160,180,200T,200
1.compact ,portable,highly effective
2.OEM accepted
3.certificate:ISO9001
portable welding set machine ZX7-200
,portable welding set
,zx7 welding machine,welding machine
Technical parameter
zx7-200
Rated voltage(V)
230
Input capacity(KW)
7.1
Frequency(HZ)
50/60
No-load VOLTAGE(v)
78
Current ampere
10-160
Rated duty cycle(%)
60%
Efficiency(%)
80
Class of insulation
H
Applied welding Rod(mm)
1.6-5.0
Fuse(A)
30
Case protection Degree
IP21
Arc-starting (COS)
0.93
Weight(KG)
6.8
External dimension(cm)
43*21.4*30.5
Our company Hangzhou Jante industrial Co., Ltd. supply complete with electrode holder and earth clamp, facemask and welding brush,carton box.
portable welding set machine ZX7-200T
is the main product of our company
. It is more portable than ZX7-200 and with almost the same fuction.
1.compact ,portable,highly effective
2.OEM accepted
3.certificate:ISO9001
portable welding set machine ZX7-200
,portable welding set
,zx7 welding machine,welding machine
Technical parameter
zx7-200
Rated voltage(V)
230
Input capacity(KW)
7.1
Frequency(HZ)
50/60
No-load VOLTAGE(v)
78
Current ampere
10-160
Rated duty cycle(%)
60%
Efficiency(%)
80
Class of insulation
H
Applied welding Rod(mm)
1.6-5.0
Fuse(A)
30
Case protection Degree
IP21
Arc-starting (COS)
0.93
Weight(KG)
6.8
External dimension(cm)
43*21.4*30.5
Our company Hangzhou Jante industrial Co., Ltd. supply complete with electrode holder and earth clamp, facemask and welding brush,carton box.
portable welding set machine ZX7-200T
is the main product of our company
. It is more portable than ZX7-200 and with almost the same fuction.
poultry cage mesh welding machine
poultry cage mesh welding machine
weld wire dia:1.8-3.0mm
max width:1200mm
poultry cage mesh welding machine
Function Characteristics:
This machine adopts electrical synchronous control technique, both welding time and separate-control welding is composed of digital and integrated electric circuit. This operation is accurate , it has stable function , firm welded point, and without welded tracks. Not only welding speed is fast, but also it is easy to learn and operate. Fallen weft structure and drawing materials are automatic, so it is even and accurate , the edge of mesh is regular, it is unnecessary to slice the ends, drawing mesh system adopts the device with elastic tension link and fixing mesh , it is easy to regulate mesh hole, and mesh size is rather accurate, welding aperture could also adjust randomly within range.
Use of The Product:
1. welding for breed aquatic mesh (poultry mesh)
2. welding building mesh(reinforcing mesh, floor warming mesh, seed-bed mesh and room mesh).
Main parameter:
Wire Diameter
1.8-3.0mm
Rated Voltage
380V
Welding Aperture
50*50-200*200mm
Rated Electrical Power
180KVA
Width Of Mesh
1200mm
Overall Dimension
2.2 * 1.9 * 1.5M
Number of Warp
25
Machine Weight
3.2T
Welding Speed
45(times/minute)
weld wire dia:1.8-3.0mm
max width:1200mm
poultry cage mesh welding machine
Function Characteristics:
This machine adopts electrical synchronous control technique, both welding time and separate-control welding is composed of digital and integrated electric circuit. This operation is accurate , it has stable function , firm welded point, and without welded tracks. Not only welding speed is fast, but also it is easy to learn and operate. Fallen weft structure and drawing materials are automatic, so it is even and accurate , the edge of mesh is regular, it is unnecessary to slice the ends, drawing mesh system adopts the device with elastic tension link and fixing mesh , it is easy to regulate mesh hole, and mesh size is rather accurate, welding aperture could also adjust randomly within range.
Use of The Product:
1. welding for breed aquatic mesh (poultry mesh)
2. welding building mesh(reinforcing mesh, floor warming mesh, seed-bed mesh and room mesh).
Main parameter:
Wire Diameter
1.8-3.0mm
Rated Voltage
380V
Welding Aperture
50*50-200*200mm
Rated Electrical Power
180KVA
Width Of Mesh
1200mm
Overall Dimension
2.2 * 1.9 * 1.5M
Number of Warp
25
Machine Weight
3.2T
Welding Speed
45(times/minute)
poultry mesh welding machine
poultry mesh welding machine
easy to operate
stable function
frim weld dot
precise mesh size
poultry mesh welding machine
Function Characteristics:
This machine adopts electrical synchronous control technique, both welding time and separate-control welding is composed of digital and integrated electric circuit. This operation is accurate , it has stable function , firm welded point, and without welded tracks. Not only welding speed is fast, but also it is easy to learn and operate. Fallen weft structure and drawing materials are automatic, so it is even and accurate , the edge of mesh is regular, it is unnecessary to slice the ends, drawing mesh system adopts the device with elastic tension link and fixing mesh , it is easy to regulate mesh hole, and mesh size is rather accurate, welding aperture could also adjust randomly within range.
Use of The Product:
1. welding for breed aquatic mesh (poultry mesh)
2. welding building mesh(reinforcing mesh, floor warming mesh, seed-bed mesh and room mesh).
Main parameter:
Wire Diameter
1.8-3.0mm
Rated Voltage
380V
Welding Aperture
50*50-200*200mm
Rated Electrical Power
180KVA
Width Of Mesh
1200mm
Overall Dimension
2.0*2.3*1.6M
Number of Warp
25
Machine Weight
3.2T
Welding Speed
45(times/minute)
easy to operate
stable function
frim weld dot
precise mesh size
poultry mesh welding machine
Function Characteristics:
This machine adopts electrical synchronous control technique, both welding time and separate-control welding is composed of digital and integrated electric circuit. This operation is accurate , it has stable function , firm welded point, and without welded tracks. Not only welding speed is fast, but also it is easy to learn and operate. Fallen weft structure and drawing materials are automatic, so it is even and accurate , the edge of mesh is regular, it is unnecessary to slice the ends, drawing mesh system adopts the device with elastic tension link and fixing mesh , it is easy to regulate mesh hole, and mesh size is rather accurate, welding aperture could also adjust randomly within range.
Use of The Product:
1. welding for breed aquatic mesh (poultry mesh)
2. welding building mesh(reinforcing mesh, floor warming mesh, seed-bed mesh and room mesh).
Main parameter:
Wire Diameter
1.8-3.0mm
Rated Voltage
380V
Welding Aperture
50*50-200*200mm
Rated Electrical Power
180KVA
Width Of Mesh
1200mm
Overall Dimension
2.0*2.3*1.6M
Number of Warp
25
Machine Weight
3.2T
Welding Speed
45(times/minute)
poultry mesh welding machine
poultry mesh welding machine
easy to operate
stable function
frim weld dot
precise mesh size
poultry mesh welding machine
Function Characteristics:
This machine adopts electrical synchronous control technique, both welding time and separate-control welding is composed of digital and integrated electric circuit. This operation is accurate , it has stable function , firm welded point, and without welded tracks. Not only welding speed is fast, but also it is easy to learn and operate. Fallen weft structure and drawing materials are automatic, so it is even and accurate , the edge of mesh is regular, it is unnecessary to slice the ends, drawing mesh system adopts the device with elastic tension link and fixing mesh , it is easy to regulate mesh hole, and mesh size is rather accurate, welding aperture could also adjust randomly within range.
Use of The Product:
1. welding for breed aquatic mesh (poultry mesh)
2. welding building mesh(reinforcing mesh, floor warming mesh, seed-bed mesh and room mesh).
Main parameter:
Wire Diameter
1.8-3.0mm
Rated Voltage
380V
Welding Aperture
50*50-200*200mm
Rated Electrical Power
180KVA
Width Of Mesh
1200mm
Overall Dimension
2.0*2.3*1.6M
Number of Warp
25
Machine Weight
3.2T
Welding Speed
45(times/minute)
easy to operate
stable function
frim weld dot
precise mesh size
poultry mesh welding machine
Function Characteristics:
This machine adopts electrical synchronous control technique, both welding time and separate-control welding is composed of digital and integrated electric circuit. This operation is accurate , it has stable function , firm welded point, and without welded tracks. Not only welding speed is fast, but also it is easy to learn and operate. Fallen weft structure and drawing materials are automatic, so it is even and accurate , the edge of mesh is regular, it is unnecessary to slice the ends, drawing mesh system adopts the device with elastic tension link and fixing mesh , it is easy to regulate mesh hole, and mesh size is rather accurate, welding aperture could also adjust randomly within range.
Use of The Product:
1. welding for breed aquatic mesh (poultry mesh)
2. welding building mesh(reinforcing mesh, floor warming mesh, seed-bed mesh and room mesh).
Main parameter:
Wire Diameter
1.8-3.0mm
Rated Voltage
380V
Welding Aperture
50*50-200*200mm
Rated Electrical Power
180KVA
Width Of Mesh
1200mm
Overall Dimension
2.0*2.3*1.6M
Number of Warp
25
Machine Weight
3.2T
Welding Speed
45(times/minute)
poultry welded mesh welding machine
poultry welded mesh welding machine
fast speed,accurate operation,stable function
poultry welded mesh welding machine
Function Characteristics:
This machine adopts electrical and electronic synchronous control technique, both welding time and separate-control welding is composed of digital and integrated electric circuit. This operation is accurate , it has stable function , firm welded point, and without welded tracks. Not only welding speed is fast, but also it is easy to learn and operate. Fallen weft structure and drawing materials are automatic, so it is even and accurate , the edge of mesh is regular, it is unnecessary to slice the ends, drawing mesh system adopts the device with elastic tension link and fixing mesh , it is easy to regulate mesh hole, and mesh size is rather accurate, welding aperture could also adjust randomly within range.
Use of The Product:
1. welding mesh breed animal, bird, pet etc.(poultry mesh)
2. welding building mesh(reinforcing mesh, floor warming mesh, seed-bed mesh and room mesh).
Main parameter:
Wire diameter 1.8-3.0(mm)
Rated voltage 380V
Welding aperture 50 x 50-200 x 200(mm)
Rated electrical power 75KVA
Width of mesh 1200mm
Overall dimension 2.2 * 1.9 * 1.5M
Number of warp 15
Machine weight 2.8T
Welding speed 45(times/minute)
fast speed,accurate operation,stable function
poultry welded mesh welding machine
Function Characteristics:
This machine adopts electrical and electronic synchronous control technique, both welding time and separate-control welding is composed of digital and integrated electric circuit. This operation is accurate , it has stable function , firm welded point, and without welded tracks. Not only welding speed is fast, but also it is easy to learn and operate. Fallen weft structure and drawing materials are automatic, so it is even and accurate , the edge of mesh is regular, it is unnecessary to slice the ends, drawing mesh system adopts the device with elastic tension link and fixing mesh , it is easy to regulate mesh hole, and mesh size is rather accurate, welding aperture could also adjust randomly within range.
Use of The Product:
1. welding mesh breed animal, bird, pet etc.(poultry mesh)
2. welding building mesh(reinforcing mesh, floor warming mesh, seed-bed mesh and room mesh).
Main parameter:
Wire diameter 1.8-3.0(mm)
Rated voltage 380V
Welding aperture 50 x 50-200 x 200(mm)
Rated electrical power 75KVA
Width of mesh 1200mm
Overall dimension 2.2 * 1.9 * 1.5M
Number of warp 15
Machine weight 2.8T
Welding speed 45(times/minute)
power weld mig welder
power weld mig welder
1 Reliable mig welding machine
2 IGBT mig welding
3 Small,light
power weld mig welder
1 Reliable mig welding machine
2 IGBT mig welding
3 Small,light
1.IGBT inverter technology with current control, reliable quality, stable performance.
2.Equip with closed loop feedback, constant voltage output, good at protest the fluctuation of voltage with automatic compensation function (±15%).
3.Be controlled by electronic reactor, make it possible for stable welding process, little spark, deep pool, excellent molding.
4.Proper slowly wire feeding when igniting arc, wipe off molten drop after welding, can ensure the success rate of arc-strike.
5.Suitable for medium-thin plate with thickness over 0.8mm.
6.Small volume and light weight, it is utility and economic, very easy to operate.
7.Saving cost with low consumption, can perfectly instead of tap welding machines.
MODEL
MIG200T
MIG250T
Power voltage
Single phase AC 220V±15%
Three phase AC 380V±15%
Frequency
50Hz-60Hz
50Hz-60Hz
Input current
11A
14A
Power capacity
6.4KVA
9.2KW
Welding current
50-200A
50-250A
Rated output voltage
15-26V
15-29V
Rated output current
24
26.5
Rated Duty cycle
60%
60%
Power factor
0.85
0.93
Efficiency
85
85
Insulation class
B
B
Type of wire feeder
Integrated
Integrated
After blow time
1
1
Diameter of wire wheel
270mm
270mm
Wire Diameter
0.8/1.0
0.8/1.0
Weight
25kg
26.5kg
Overall dimension
535×270×475mm
535×270×475mm
1 Reliable mig welding machine
2 IGBT mig welding
3 Small,light
power weld mig welder
1 Reliable mig welding machine
2 IGBT mig welding
3 Small,light
1.IGBT inverter technology with current control, reliable quality, stable performance.
2.Equip with closed loop feedback, constant voltage output, good at protest the fluctuation of voltage with automatic compensation function (±15%).
3.Be controlled by electronic reactor, make it possible for stable welding process, little spark, deep pool, excellent molding.
4.Proper slowly wire feeding when igniting arc, wipe off molten drop after welding, can ensure the success rate of arc-strike.
5.Suitable for medium-thin plate with thickness over 0.8mm.
6.Small volume and light weight, it is utility and economic, very easy to operate.
7.Saving cost with low consumption, can perfectly instead of tap welding machines.
MODEL
MIG200T
MIG250T
Power voltage
Single phase AC 220V±15%
Three phase AC 380V±15%
Frequency
50Hz-60Hz
50Hz-60Hz
Input current
11A
14A
Power capacity
6.4KVA
9.2KW
Welding current
50-200A
50-250A
Rated output voltage
15-26V
15-29V
Rated output current
24
26.5
Rated Duty cycle
60%
60%
Power factor
0.85
0.93
Efficiency
85
85
Insulation class
B
B
Type of wire feeder
Integrated
Integrated
After blow time
1
1
Diameter of wire wheel
270mm
270mm
Wire Diameter
0.8/1.0
0.8/1.0
Weight
25kg
26.5kg
Overall dimension
535×270×475mm
535×270×475mm
powerful ultrasonic plastic welding machine
powerful ultrasonic Plastic welder Japan piezoelectricity ceramic transducer, specially designed amplitude transformer
Detailed Product Description
powerful ultrasonic Plastic welder
Japan piezoelectricity ceramic transducer,
specially designed amplitude transformer,
4200w Ultrasonic Plastic Welder
The piezoelectricity ceramic transducer is assembled in Japan and can give a strong and stable output.
With a specially desigened amplitude transformer, solid and durable.
A horizontal adjustable structure is adopted for rod head, it makes adjusting easier.
A liner guide bearing adopted, it is more advanced in technique.
It is made of a whole set high-quality imported components.
Model
KSL-1542
OUTPUT POWER
4200W
Frequency
15khz
Input voltage
220V
cooling system for horn
wind cool
The horn route
100mm
vibrate system
auto-stimuiating
work time
0.01s-9.99s
air pressure
1-7 bar
welding area
350
air compressor
2HP
Net weight
300kg
Detailed Product Description
powerful ultrasonic Plastic welder
Japan piezoelectricity ceramic transducer,
specially designed amplitude transformer,
4200w Ultrasonic Plastic Welder
The piezoelectricity ceramic transducer is assembled in Japan and can give a strong and stable output.
With a specially desigened amplitude transformer, solid and durable.
A horizontal adjustable structure is adopted for rod head, it makes adjusting easier.
A liner guide bearing adopted, it is more advanced in technique.
It is made of a whole set high-quality imported components.
Model
KSL-1542
OUTPUT POWER
4200W
Frequency
15khz
Input voltage
220V
cooling system for horn
wind cool
The horn route
100mm
vibrate system
auto-stimuiating
work time
0.01s-9.99s
air pressure
1-7 bar
welding area
350
air compressor
2HP
Net weight
300kg
Best quality king brand PE pipe welding machine
PE pipe welding machine
1.Welding Range 20-1600 mm
2.Applied to connect PE, PP &. PVDF pipe and pipe fitting
PE pipe welding machine
PE Pipe Welding Machine, Butt Fusion Welder,Pipe fusion equipment,Butt Welders, PE pipe welding machine,Butt Fusion Equipmen
ZK 1200 Hydraulic Butt Fusion Welding Machine
-
Unique in China, Designed for Global Market
Technical Data
Welding Range
800-1200 mm
Temperature variable
±5
Power supply
380V
±
10%, 50Hz
Power of heating plate
18 KW
Max.working pressure
14MPa
Power of planing tool
2.2 KW
Power of hydraulic station
2.2 KW
Total Power
23 KW
Heating plate Max. Temp.
270
Overall weight (kg)
3000 kg
Packing in two plywood case (cm), 290*180*190, 160*155*170 total 14.10 cbm
Features
* Applied to connect PE, PP &. PVDF pipe and pipe fitting on construction site, and in workshop.
* Planing tool with a reduction gear, not chain transmission, more stable, efficiency and long working life;
* Hydraulic station and electric control box are integrated in one control desk.
* Removable PTFE coated heating plate with separate temperature controlling system.
* Robust construction with low maintain requirement.
* Designed with a clamp opening angle of 45 degree.
* Low starting pressure ensures reliable welding quality of small pipes.
* Changeable welding position enables to weld various fittings more easily.
* set the timer to count the time with regular alarm function.
* High-accurate and shockproof pressure meter indicates clearer readings.
* For one year quality warranty with free maintenance.
1.Welding Range 20-1600 mm
2.Applied to connect PE, PP &. PVDF pipe and pipe fitting
PE pipe welding machine
PE Pipe Welding Machine, Butt Fusion Welder,Pipe fusion equipment,Butt Welders, PE pipe welding machine,Butt Fusion Equipmen
ZK 1200 Hydraulic Butt Fusion Welding Machine
-
Unique in China, Designed for Global Market
Technical Data
Welding Range
800-1200 mm
Temperature variable
±5
Power supply
380V
±
10%, 50Hz
Power of heating plate
18 KW
Max.working pressure
14MPa
Power of planing tool
2.2 KW
Power of hydraulic station
2.2 KW
Total Power
23 KW
Heating plate Max. Temp.
270
Overall weight (kg)
3000 kg
Packing in two plywood case (cm), 290*180*190, 160*155*170 total 14.10 cbm
Features
* Applied to connect PE, PP &. PVDF pipe and pipe fitting on construction site, and in workshop.
* Planing tool with a reduction gear, not chain transmission, more stable, efficiency and long working life;
* Hydraulic station and electric control box are integrated in one control desk.
* Removable PTFE coated heating plate with separate temperature controlling system.
* Robust construction with low maintain requirement.
* Designed with a clamp opening angle of 45 degree.
* Low starting pressure ensures reliable welding quality of small pipes.
* Changeable welding position enables to weld various fittings more easily.
* set the timer to count the time with regular alarm function.
* High-accurate and shockproof pressure meter indicates clearer readings.
* For one year quality warranty with free maintenance.
pp bag ultrasonic plastic welding machine
ultrasonic plastic welding machine suitable for various industries such as stationeries, packing, vehicle and so on.
ultrasonic plastic welding machine:
1. Original energy converter made in Japan, which is powerful and reliable;
2. Titanium alloy grading pole, solid and endurable;
3. With rectangle vertical pole, linear guide shaft, precision micro-adjustment;
4. It has adoopte with export power tube to assure its output power of ultrosonic;
5. It has adopted with Flange Plate structure to make adjustment become more easily and quickly;
6. With precision ball bearing, air pressure frame, simple mould position;
7. With self mould manufacturing workshop,capable of USA 7075,6061 alloy aluminium mould model;
8. Machine Technical Parameters
Model
Item
RJ-1520F
RJ-1522F
RJ-1526F
RJ-1532F
Power Output
2000W
2200W
2600W
3200W
Oscillation Frequency
15KHz
Voltage
50/60Hz 220V AC/1P 20A
Max. Distance Between Head to Table Surface
350mm
Travel
100mm
Motor Spring
Screw-Knob
Output Time
0.019.99SO
Cooling System
Fan Cooling
Welding Area
ç180
ç230
ç240
ç300
ç350
Oscillation Syste
Himself-excited Circuit
ultrasonic plastic welding machine:
1. Original energy converter made in Japan, which is powerful and reliable;
2. Titanium alloy grading pole, solid and endurable;
3. With rectangle vertical pole, linear guide shaft, precision micro-adjustment;
4. It has adoopte with export power tube to assure its output power of ultrosonic;
5. It has adopted with Flange Plate structure to make adjustment become more easily and quickly;
6. With precision ball bearing, air pressure frame, simple mould position;
7. With self mould manufacturing workshop,capable of USA 7075,6061 alloy aluminium mould model;
8. Machine Technical Parameters
Model
Item
RJ-1520F
RJ-1522F
RJ-1526F
RJ-1532F
Power Output
2000W
2200W
2600W
3200W
Oscillation Frequency
15KHz
Voltage
50/60Hz 220V AC/1P 20A
Max. Distance Between Head to Table Surface
350mm
Travel
100mm
Motor Spring
Screw-Knob
Output Time
0.019.99SO
Cooling System
Fan Cooling
Welding Area
ç180
ç230
ç240
ç300
ç350
Oscillation Syste
Himself-excited Circuit
ppr pipe welding machine
yisen-63-A6 ,is aa upscale welding machine ,equiped 6 mouiped 6 mould of its diameter size20,25,32
WOKING rangeΦ20-Φ63mm,Applying to PPR ,PB, PE,PEX
voltage:220v
power:700-1500W
N.W/G.W:28/27KG
control tempreture:0-300
packing QTY(pcs):5pcs
WOKING rangeΦ20-Φ63mm,Applying to PPR ,PB, PE,PEX
voltage:220v
power:700-1500W
N.W/G.W:28/27KG
control tempreture:0-300
packing QTY(pcs):5pcs
ppr pipe hot melt welding machine,ppr welding machine
1.Fast heating and safe operation
2.Certificate:CE,ISO9001
3.size:dn20,25,32,40,50,63
4.electronic temperature conmtrol.
Feature:
(
1.) welding connector
(2.) Plastic pipe welding machine
(3.) Quality is excellent and professional.The price is favourable and reasonable.
(4.) Voltage: 220V±10%,frequency:50/60Hz; Power: 800W
(5.) Component: 20-63MM sockets, screws, Screwdriver,hexagonal spanners.Using Manual.standing.
(6.) Pack list: 5pcs/CTN, 15.25/14.75KGS (G.W./N.W.).
(7.) Up to 500pcs, appointed color box and instruction.
Usage:
1. Fixed install heating-side welding head, the welding device placed on the shelves, according to specifications required to install the corresponding heating pipe die head, and pull tight with a hex generally small in the preceding paragraph, a large back-end.
2. Switch on the power (note the power supply must be protected with a ground line), according to the corresponding models of the machine to the instruction attention to light changes, until the welding temperature control device to enter the work state, can be started.
3. With vertical cutting device to cut off pipe tube, pipe and fittings will also promote the welding device with no moving within the die, as required for operation. Immediately after the heating time to reach pipes and fittings removed from the die head at the same time, rapidly rotating non-uniform insert directly to the desired depth, to form a uniform flange joints.
please inquire us for more information...
2.Certificate:CE,ISO9001
3.size:dn20,25,32,40,50,63
4.electronic temperature conmtrol.
Feature:
(
1.) welding connector
(2.) Plastic pipe welding machine
(3.) Quality is excellent and professional.The price is favourable and reasonable.
(4.) Voltage: 220V±10%,frequency:50/60Hz; Power: 800W
(5.) Component: 20-63MM sockets, screws, Screwdriver,hexagonal spanners.Using Manual.standing.
(6.) Pack list: 5pcs/CTN, 15.25/14.75KGS (G.W./N.W.).
(7.) Up to 500pcs, appointed color box and instruction.
Usage:
1. Fixed install heating-side welding head, the welding device placed on the shelves, according to specifications required to install the corresponding heating pipe die head, and pull tight with a hex generally small in the preceding paragraph, a large back-end.
2. Switch on the power (note the power supply must be protected with a ground line), according to the corresponding models of the machine to the instruction attention to light changes, until the welding temperature control device to enter the work state, can be started.
3. With vertical cutting device to cut off pipe tube, pipe and fittings will also promote the welding device with no moving within the die, as required for operation. Immediately after the heating time to reach pipes and fittings removed from the die head at the same time, rapidly rotating non-uniform insert directly to the desired depth, to form a uniform flange joints.
please inquire us for more information...
Subscribe to:
Comments (Atom)